The AirTAC HLQ25X75SB AirTAC Ball-Bearing Slide Table Cylinder Bore 25 is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
The HLQ25X75SB is a genuine AirTAC double-acting dual-rod slide table cylinder with an integrated ball-bearing linear guide. The ball-bearing design ensures anti-rust, dust-proof performance with low deflection, while the dual rod increases thrust and a floating joint protects the rod from side torque. This bore 25, stroke 75 model delivers higher thrust for heavier guided work.
Magnet-fitted as standard, the body features magnetic-switch slots for CMSH, DMSH, or EMSH sensors. We verify thrust values, overall dimensions, and allowable load-moment from the datasheet or on-page table upon request.
| Model | HLQ25X75SB AirTAC Ball-Bearing Slide Table Cylinder Bore 25 |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
Select this bore 25 model when you need higher thrust in a compact guided slide. The HLQ ball-bearing guide offers anti-rust, dust-proof performance with low deflection over the 75mm stroke. The B adjuster equips shock absorbers at both ends to manage impact energy. Choose your thread (PT, G, or NPT) and route load/moment sizing to us via published tables and curves.
We verify exact allowable load and moment from the datasheet.
Positions workpieces at assembly stations with shock absorbers managing end-of-stroke impact for heavier loads.
Moves small parts along conveyor lines with anti-rust ball-bearing guides ensuring accurate travel.
Acts as a guided stopper for incoming workpieces, absorbing impact with dual shock absorbers.
The B code indicates a shock absorber installed at both ends to manage end-of-stroke impact energy, ideal for heavier loads.
Yes, the magnet is standard across the entire HLQ line. CMSH, DMSH, and EMSH sensor switches fit into the body slots.