The AirTAC HLQ8X30SA AirTAC Ball Bearing Slide Table Bore 8 is a genuine HLQ slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
The AirTAC HLQ8X30SA slide-table cylinder combines a double-acting dual-rod air cylinder with an anti-rust, dust-proof ball-bearing linear guide. The table travels straight, the dual rod doubles thrust, and a floating joint prevents side torque on the rod. This 8 mm bore, 30 mm stroke unit provides light thrust for compact tasks.
This genuine AirTAC part includes a standard magnet for position sensing, fitting CMSH, DMSH, or EMSH switches in the body slots. Contact us to verify thrust, dimensions, and load-moment limits from the datasheet or on-page table.
| Model | HLQ8X30SA AirTAC Ball Bearing Slide Table Bore 8 |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
This 8 mm bore is suited for light thrust; step up the bore for more push. The HLQ ball-bearing guide is chosen for its anti-rust and dust-proof properties in clean applications. The stroke fits the bore's standard table. This model features an A-suffix adjustable rubber stopper at both ends for cushioning, avoiding the need for a separate shock absorber. Thread is PT. We can provide published load and moment sizing tables and curves.
Accurate placement of small parts onto a PCB with rubber stoppers for repeatable end-position control.
Transfers lightweight products between conveyors with precise, dust-proof guided motion.
Indexes a gripper along a linear path with consistent stopping force for reliable handling.
The A indicates an adjustable rubber stopper at both ends, providing repeatable end-position cushioning instead of a basic bumper.
Maximum working pressure is 0.7 MPa (100 psi), operating range is 0.2-0.7 MPa (29-100 psi), and meter-out speed should stay at or below 500 mm/s.