The AirTAC HLQ8X40SA AirTAC Ball Bearing Slide Table Bore 8 is a genuine HLQ slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
The AirTAC HLQ8X40SA slide-table cylinder merges a double-acting dual-rod air cylinder with an anti-rust, dust-proof ball-bearing guide. The table moves straight, the dual rod increases thrust, and a floating joint protects the rod from side torque. This 8 mm bore, 40 mm stroke unit gives light thrust for compact guided tasks.
As a genuine AirTAC part, it features a standard magnet for position sensing, compatible with CMSH, DMSH, or EMSH switches in the body slots. We can confirm thrust, dimensions, and load-moment limits from the datasheet or on-page spec table on request.
| Model | HLQ8X40SA AirTAC Ball Bearing Slide Table Bore 8 |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
Select the 8 mm bore for light thrust applications; a larger bore offers more push. The HLQ ball-bearing guide provides anti-rust, dust-proof linear motion for clean environments. Stroke fits within the bore's standard table. The A-suffix designates an adjustable rubber stopper at both ends for precise end-position cushioning. Thread is PT. We provide published load, moment, and deflection tables for sizing.
Positions a small sub-assembly with a 40 mm stroke and rubber stoppers for accurate end-of-travel placement.
Pushes lightweight trays between stations with dust-proof guided travel to keep the work area clean.
Moves a gripper straight along its path with minimal deflection, aided by adjustable end stops.
The A means the cylinder has an adjustable rubber stopper at both ends for end-position cushioning, rather than just a basic bumper.
We verify allowable load, kinetic energy, and moment from the published datasheet tables and deflection curves on request, rather than estimating them.