AirTAC Pneumatics
AirTAC BSE Series Rod-Lock ISO Cylinders
The AirTAC BSE series integrates a spring-applied, air-released rod-lock unit onto an ISO 15552 cylinder (32-125mm bore) to hold vertical and suspended loads safely on air loss or E-stop.
inventory_2313 models availableSeries Overview
The BSE series is a rod-lock air cylinder built on the AirTAC SE standard ISO 15552 body. It spans 7 bores from 32 to 125mm. The push force at 0.5 MPa ranges from about 402 N to about 6136 N, matching the SE standard cylinder class.
A spring applies a clamping collet directly to the piston rod. Supplying air to a separate G1/8 release port frees the rod. The lock is spring-applied and air-released, making it fail-safe: if air is lost, exhausted, or an E-stop trips, the collet clamps and holds the rod in both directions at whatever position it stopped.
This provides real drift protection for vertical or suspended loads, unlike a plain SE cylinder. The cylinder runs on 0.15-0.7 MPa, and the separate release port unlocks with 0.15-0.7 MPa. The BSE is not a dynamic brake. Engage the lock only after the rod stops, and release it only when pressures on both sides of the piston are balanced. Allow at least about 0.5 s for full release before moving.
Browse Models
Airtac BSE Clamp Standard Cylinder BSE32X1000S
SKU: BSE32X1000S
$260.05$267.55
schedule Confirm lead time
Typical Applications
Vertical Lift Gates
Prevents suspended loads from crashing down when air pressure drops or an E-stop is hit, holding the rod safely in both directions.
Pallet Stops
Locks a stopper blade in position to hold pallets on a conveyor, ensuring no drift occurs during heavy loading or air exhaustion.
Z-Axis Machine Stops
Holds a vertical machining axis rigidly in place during power loss, using the clamping collet to prevent gravity-induced descent.
How to Choose the Right Model
Choose the BSE for fail-safe rod holding on vertical or suspended ISO 15552 axes. Match the bore to your load: the 32-125mm range yields a push force at 0.5 MPa from about 402 N to about 6136 N. For a double-rod rod-lock configuration, step out to the BSED family. For a plain ISO 15552 axis without a lock, use the SE.
Confirm these 5 points before ordering: 1) Bore size (32-125mm), 2) Stroke length, 3) Release port thread (G1/8) and cylinder operating pressure (0.15-0.7 MPa), 4) ISO 15552 mounting interface and SE accessories (excluding FTC), 5) Magnet option for CMSE/DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and available mounting space
- ✓ Port / thread type (PT / NPT / G)
- ✓ Sensor / magnet option (-S)?
- ✓ Side load — consider a guided model
Frequently Asked Questions
The BSE series spans 7 bores from 32 to 125mm. The push force at 0.5 MPa ranges from about 402 N for the 32mm bore to about 6136 N for the 125mm bore. The bidirectional static holding force per bore is charted in the model figures.
It is spring-applied and air-released for fail-safe operation. If air is lost, a clamping collet holds the rod in both directions. It is not a dynamic brake: engage the lock only after the rod stops, balance pressures on both sides of the piston, and allow at least about 0.5 s for full release before moving.
The cylinder operates on 0.15-0.7 MPa. The separate release port (G1/8) unlocks with 0.15-0.7 MPa. It uses an ISO 15552 mounting interface (SE body); SE accessories fit BSE except FTC, and CMSE/DMSE sensors fit magnetic BSE models.
Choose BSE for fail-safe rod holding on vertical or suspended ISO 15552 axes. Use BSED if you need a double-rod rod-lock configuration. If you need a standard ISO 15552 cylinder without a mechanical lock, choose the SE series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote
Send us the model number, quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.