Airtac 2KS Series Fluid Control Valve 2KS03008B
2、Wide pressure range compatibility with specialized configurations: Ultra-High Pressure (X), High Pressure (H), Standard, and High Flow (L) variants;
3、Compact design with minimized footprint, lightweight construction, and tool-free installation/maintenance capabilities;
4、SUS304 stainless steel body with Class B thermal-rated coil. Standard FKM (Fluoroelastomer) seals ensure compatibility with diverse media. Custom sealing materials available through technical consultation;
5、IP65-rated coil protection with wiring options: direct lead wire or DIN connector interface.
Category: Fluid Solenoid Valves | Brand: AirTAC | Series: 2KS
AirTAC 2KS Series Fluid Control Valve 2KS03008B Technical Details
- Model Identification: 2KS03008B
- Valve Type: 2-position 3-way solenoid valve (Direct-acting/Normally Closed)
- Port Configuration: PT1/8 (G1/8 optional)
- Pressure Range: 0.1–0.8 MPa (14.5–116 PSI)
- Voltage Variations: DC12V/24V ±10%, AC110V/220V ±10% (50/60Hz)
- Flow Capacity: 180 NL/min (Cv=0.27)
- Weight: 195g ±5g (with connector)
- Body Dimensions: 50mm(L) × 35mm(W) × 65mm(H)
- Seal Compounds: Dual-material design (NBR main seals + FKM secondary wipers)
- Ambient Temperature: -5℃ to 80℃ (non-freezing)
- Electrical Protection: Class F insulation, IP67 rated
- Response Time: ≤15ms (at rated voltage)
- Duty Cycle: 100% continuous operation capable
High-speed fluid control valve featuring precision-engineered spool design for rapid switching in low-viscosity media applications. The corrosion-resistant anodized aluminum body integrates heat dissipation fins, supporting extended duty cycles in compact automation systems. Requires 5μm filtration and lubricated air (ISO 8573-1 class 3).
- Pneumatic cylinder sequencing in assembly robots
- Vacuum generator control for pick-and-place systems
- Medical gas line switching mechanisms
- Beverage dispensing equipment flow control
- Semiconductor wafer handling vacuum/pressure systems
Mounting Protocol:
Install with manifold base using M3×12mm screws (1.2N·m torque limit).
Maintain 20mm clearance below valve for cable routing. Perform monthly
manual override tests to prevent spool stagnation.
Media Compatibility:
Not suitable for ethylene glycol mixtures or phosphate ester fluids.
Maximum moisture content ≤1.3g/m³. Always install downstream of
pressure regulator.
| Property | Property Value |
|---|---|
| sku | 2KS03008B |
| Port Size | PT1/4 |
| Flow Aperture | PT1/4 |
| Coil Voltage | DC24V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.