AirTAC 3V300M-15 3V-F Base (3V300M15F)
The AirTAC AirTAC 3V300M-15 3V-F Base (3V300M15F) is a genuine 3V-F manifold base manifold base for 15 stations on one shared air supply. A base is a machined block: it carries no coil and no solenoid, so the valves that sit on it are ordered separately.
- Valve type3/2-way (3-port, 2-position)
- Stations15
- Series3V-F manifold base
About the AirTAC 3V300M-15 3V-F Base (3V300M15F)
The 3V300M15F is a machined manifold base in the AirTAC 3V300M range, arranged for fifteen 3/2 solenoid valve positions on one shared air supply. One feed line and one wiring route serve the whole bank, so a machine with many single-acting functions can be built from identical valve positions on a single block. Each valve on it does one simple job: feed its outlet with air, or vent that outlet.
It is a genuine AirTAC part, and it is only the mounting half of the system: each of the fifteen valves is a separate order, available as NC or NO, in AC220V, DC24V, AC110V, AC24V or DC12V, with DIN plug or flying-lead entry. Pressure, flow and coil-power figures for those valves are not published on this page - attach the valve list to the RFQ and we will confirm them from the datasheet.
AirTAC 3V300M-15 3V-F Base (3V300M15F) Technical Specifications
| Model | AirTAC 3V300M-15 3V-F Base (3V300M15F) |
|---|---|
| Series | 3V-F manifold base |
| Item form | Manifold base (no coil, no solenoid, no initial state) |
| Stations | 15 |
| Port size | Confirm from the datasheet — ask us |
| Thread | PT |
| Operating pressure | Confirm from the datasheet — ask us |
|---|---|
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V300M-15 3V-F Base (3V300M15F)
| 3V-F manifold base | Body. |
|---|---|
| 15F | 15 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V300M-15 3V-F Base (3V300M15F) Is Used
Electronics test fixture
A bed of spring-return clamp pins on a PCB test rig, each pin raised and released by its own 3/2 valve seated on the shared base.
Bottling line nozzle purge
A timed burst of shop air clears filler nozzles between changeovers, with every blow point switched by one valve position on the bank.
Process valve piloting
A row of 3/2 valves applies and vents pilot pressure to larger pneumatically actuated process valves on a plant air line.
Is the AirTAC 3V300M-15 3V-F Base (3V300M15F) the Right Part?
Fifteen positions are the sensible choice when a control panel serves more than a dozen separate air functions. The valves arrive by separate order: normally closed for outlets that must sit vented on power loss, normally open for the reverse; a coil voltage that matches the panel supply, which no rewiring can alter; DIN plug or flying lead to suit the cabinet. Sizing is the one open question - we hold no published flow figure for this family, so send the actuator details with the RFQ and we will confirm. If documented flow and coil power are needed today, the AirTAC 3V2 and 3V3 valve bodies have them published, and a double-acting cylinder calls for the 5-port 4V series instead.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V300M-15 3V-F Base (3V300M15F) FAQ
The station count and the fact that it is a genuine AirTAC 3/2 manifold base; the valves are a separate order. Pressure, flow and coil-power figures for those valves are confirmed from the datasheet on request via the RFQ. If published numbers are needed immediately, the AirTAC 3V2 and 3V3 bodies are the fully documented 3-port alternatives.
You order one 3/2 valve per position from this family, choosing state (NC or NO), coil voltage and electrical entry. They handle single-acting cylinders, on/off air blow and pilot duties; a double-acting cylinder needs a 5-port valve from the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V300M-15 3V-F Base (3V300M15F)
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.