AirTAC 3V300M-20 3V-F Base (3V300M20F)
The AirTAC AirTAC 3V300M-20 3V-F Base (3V300M20F) is a genuine 3V-F manifold base manifold base for 20 stations on one shared air supply. A base is a machined block: it carries no coil and no solenoid, so the valves that sit on it are ordered separately.
- Valve type3/2-way (3-port, 2-position)
- Stations20
- Series3V-F manifold base
About the AirTAC 3V300M-20 3V-F Base (3V300M20F)
Twenty positions make the 3V300M20F the densest base in this listing: a whole machine's single-acting functions served from one air connection on one machined block. Consolidation is the working benefit here - a single supply to leak-check, a single wiring route to trace, and identical valve positions that can be exchanged without repiping when a function changes.
The base is a genuine AirTAC part and carries nothing electrical itself; the twenty valves behind it are ordered separately with a choice of NC or NO state, five coil voltages and DIN plug or flying-lead entry, all available across the family. Quote us the valve list and we will confirm the datasheet figures for every position with the offer.
AirTAC 3V300M-20 3V-F Base (3V300M20F) Technical Specifications
| Model | AirTAC 3V300M-20 3V-F Base (3V300M20F) |
|---|---|
| Series | 3V-F manifold base |
| Item form | Manifold base (no coil, no solenoid, no initial state) |
| Stations | 20 |
| Port size | Confirm from the datasheet — ask us |
| Thread | PT |
| Operating pressure | Confirm from the datasheet — ask us |
|---|---|
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V300M-20 3V-F Base (3V300M20F)
| 3V-F manifold base | Body. |
|---|---|
| 20F | 20 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V300M-20 3V-F Base (3V300M20F) Is Used
CNC fixture clamping bank
Twenty clamp points on a multi-part CNC fixture, each fed and vented by its own valve on the common base.
Packing line stoppers
Pneumatic stoppers that release cartons lane by lane on a conveyor, each driven by a single-acting cylinder and its valve on the bank.
Guard interlock clamps
A machine guard held by spring-return latches that vent and release only when their valves are commanded along the shared manifold.
Is the AirTAC 3V300M-20 3V-F Base (3V300M20F) the Right Part?
Planning a twenty-valve bank is mostly bookkeeping: list each position's function, then order a valve per line with its state (NC vents on power loss, NO stays pressurised), its coil voltage matched to the panel supply, and its electrical entry. The one thing to settle early is sizing, and that is the honest gap - we have no published flow figure for this family in hand, so attach the actuator data to the RFQ and let us confirm the choice. Where a fully documented 3-port valve is required now, the AirTAC 3V2 and 3V3 bodies publish their flow and coil power; for double-acting duty, move to the 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V300M-20 3V-F Base (3V300M20F) FAQ
Not published on this page. We confirm those figures from the datasheet during the RFQ, and if a documented 3-port valve is needed without waiting, the AirTAC 3V2 (1/8in and 1/4in) and 3V3 (1/4in) bodies carry published flow and coil-power figures.
One air feed instead of twenty, one wiring route to organise, and a bank that is straightforward to fault-find position by position. The valves remain standard 3/2 units driving single-acting cylinders, blow duties and pilot lines; double-acting cylinders still need a 5-port 4V valve.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V300M-20 3V-F Base (3V300M20F)
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.