AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F)
The AirTAC AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port size1/8 in
- Coil voltageAC220V
- Electrical entryDIN plug (DIN socket type)
- Stations14
- Series3V1
About the AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F)
The 3V106A14F packs fourteen 3V1 3/2 valves into one manifold assembly: 1/8in PT ports, AC220V DIN-plug coils rated at just 4.5 VA each. Each 3/2 station has three ports - supply, outlet, exhaust - and two states, so it either feeds its line or vents it. That makes it the natural switch for single-acting (spring-return) cylinders, air blow-off, clamps or piloting a larger valve.
The valves are direct-acting with spring return and carry a manual override for commissioning. Supply air must be filtered to 40 um or finer; lubrication is not required. Coil protection is IP65 (DIN 40050).
AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F) Technical Specifications
| Model | AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F) |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC220V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 4.5 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F)
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| AC220V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 14F | 14 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F) Is Used
Watch-component pick-and-place
Cycles a small spring-return gripper on an assembly cell: the valve feeds the gripper to close on the part, then vents the line so the spring opens the jaws.
Swarf blow-off at a lathe exit
Fires a short air pulse across the conveyor belt as turned parts leave the chuck, clearing chips before the part reaches the gauge station.
Drilling-jig clamp control
Energises to clamp the workpiece with a single-acting swing clamp and, on loss of signal, vents the clamp line so the spring retracts it.
Is the AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F) the Right Part?
The 3V1 is the smallest, lowest-power body in AirTAC's 3V range, and this SKU is ordered as a 14-station manifold, so first decide whether one shared supply really suits your circuit. There is no published Cv for 3V1 - if flow matters, check the duty with us before committing. When you need more, step up to the 3V2 (1/8in and 1/4in, NC or NO selectable, Cv 0.18-0.19, vacuum rated) or the 3V3 (1/4in, Cv 0.62); if manifold density matters more than flow, the 3V2M is the dedicated dense-manifold body. If the actuator is a double-acting cylinder, you need a 5-port valve from the AirTAC 4V series instead.
Before ordering, confirm five points: port (M5 or 1/8in), thread (PT is the family standard; G and NPT are order options), coil voltage, electrical entry (DIN plug or flying lead), and the number of stations for the manifold.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F) FAQ
Operating pressure 0-0.8 MPa (0-114 psi), media temperature -20 to 70 C, AC220V coil power 4.5 VA, protection class IP65 (DIN 40050), 14 manifold stations on 1/8in PT ports. AirTAC publishes no flow coefficient (Cv) for the 3V1 body, so flow-critical duties should be confirmed with us.
No. A 3/2 valve has three ports and two states - it either feeds the outlet or vents it - which suits single-acting (spring-return) cylinders, air blow, clamping and pilot duty. A double-acting cylinder needs two working lines, so specify a 5-port valve from the AirTAC 4V series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC 3V106A-14 Solenoid Valve, 3V1 Series (3V106A14F)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.