AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM)
The AirTAC AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port size1/8 in
- Coil voltageAC220V
- Electrical entryDIN plug (DIN socket type)
- Stations19
- Series3V1
About the AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM)
On the 3V106A19F-AM, AirTAC mounts nineteen identical 3/2 direct-acting valves side by side on one shared manifold with 1/8in PT ports. Each station is a single-solenoid, spring-return valve: the solenoid switches the outlet between supply and exhaust, and the spring always returns it when the coil drops out. Every AC220V coil needs only 4.5 VA, so nineteen stations together still sit comfortably within the rating of a small control transformer.
Coils connect through a DIN plug at IP65 (DIN 40050), and each station has a manual override so you can jog individual outputs during setup. Feed the common supply with air filtered to 40 um or finer - lubrication is not required. One part number covers the entire genuine AirTAC assembly.
AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM) Technical Specifications
| Model | AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM) |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | AC220V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 4.5 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM)
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| AC220V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 19F | 19 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM) Is Used
PCB test fixture clamping
A single-acting clamp on an electronics test fixture is pressed by the solenoid and released by the spring, so a control fault always leaves the board accessible.
Parcel sorting diverters
Pilot the diverter gate cylinder on a parcel sorting conveyor; the spring return vents the line so the gate falls back to its default lane whenever power is lost.
Robot gripper venting in a machine-tending cell
Switch the small single-acting gripper on a machine-tending robot arm; the 3/2 exhaust port gives the gripper a defined vent path when the cycle is interrupted.
Is the AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM) the Right Part?
Sizing check: 3V1 publishes no Cv or effective-area figure, so treat it as a low-flow, low-power body and confirm flow-critical duties with us. If nineteen stations each need more air, the same range steps up to 3V2 (1/8in and 1/4in ports, NC or NO selectable, Cv 0.18-0.19, vacuum rated) or 3V3 (1/4in, Cv 0.62); for maximum station density rather than flow, 3V2M is the purpose-built dense manifold. A double-acting cylinder needs 5 ports, not 3 - that points you to the AirTAC 4V series.
Five things to fix before you order: port size (M5 or 1/8in), thread standard (PT as standard on this family, with G and NPT as catalogue options to order), coil voltage, electrical entry (DIN plug or flying lead), and how many stations the manifold carries.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM) FAQ
The valve works from 0 to 0.8 MPa (0-114 psi) across -20 to 70 C. The AC220V coil takes 4.5 VA; across the 3V1 family the ratings are AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W and DC12V 2.5 W, all protected to IP65 (DIN 40050). Filter the supply air to 40 um or finer. A Cv or effective-area value is not published for 3V1, so ask us before sizing a flow-limited circuit.
The 3V1 system integrates valves in series from 1F to 20F, so if future expansion might push you past twenty stations, split the duty across two manifolds and tell us at RFQ stage. Accessories such as the 3V1-P30 connecting-screw base set, the 3V1-P31 O-ring and long screw set and the 3V1-P32 mounting-bracket set support installation and maintenance of the bank.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC 3V106A-19 Solenoid Valve, 3V1 Series (3V106A19F-AM)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.