AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F)
The AirTAC AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port size1/8 in
- Coil voltageDC24V
- Electrical entryDIN plug (DIN socket type)
- Stations19
- Series3V1
About the AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F)
At nineteen stations, the 3V106B19F sits close to the 3V1 family's twenty-station manifold limit, making it a natural pick when a machine panel must consolidate many small on/off air functions into one 1/8in PT ported, DC24V bank. Each valve is a 3/2 direct-acting unit: the solenoid opens or closes the path between supply and outlet, the exhaust port vents the line, and the spring returns the valve whenever power is removed.
Coil draw is 3.0 W per station, protection is IP65 (DIN 40050), and every valve has a manual override for setup and diagnostics. Feed the manifold with air filtered to 40 um or finer - no lubrication is required - and confirm the factory initial state from the datasheet before integrating it into safety-related logic.
AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F) Technical Specifications
| Model | AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F) |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 3.0 W |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F)
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 19F | 19 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F) Is Used
Grippers on a pick-and-place head
Each valve feeds and vents a spring-return gripper on a robotic pick-and-place head, releasing the part safely whenever control power is lost.
Film clamp release on a stretch wrapper
One station vents the film-clamp cylinder at the end of a pallet-wrapping cycle, letting the spring pull the clamp open for tail handling.
Piloting a process diaphragm valve
A low-power station sends the pilot signal that shifts a larger diaphragm valve on a water-treatment dosing line, keeping 24 V wiring runs short.
Is the AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F) the Right Part?
Before you order a nineteen-station bank, run the five-point match: port (M5 or 1/8in), thread (PT is this family's standard, G and NPT are order options), coil voltage, electrical entry (DIN plug here, flying lead on the I codes), and the station count itself, from 1F up to 20F. Sizing note: AirTAC publishes no flow coefficient for 3V1, so verify flow-critical duties with us; alternatives with published data are 3V2 (1/8in and 1/4in, NC or NO selectable, Cv 0.18-0.19, vacuum rated) and 3V3 (1/4in, Cv 0.62), while 3V2M serves when manifold density outranks flow. Anything driving a double-acting cylinder belongs on the AirTAC 4V series, not on this 3/2.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F) FAQ
A 3/2, direct-acting, single-solenoid, spring-return manifold assembly: 0-0.8 MPa (0-114 psi), -20 to 70 C, IP65 to DIN 40050, DC24V coils at 3.0 W each, air filtered to 40 um or better, and no Cv published for the 3V1 body. Family coil powers run AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, DC12V 2.5 W.
One shared base replaces nineteen individual valve bodies and their interconnecting pipework, cutting panel space and potential leak points, while each station still runs its own 3/2 function - feeding or venting a single line for a single-acting cylinder, clamp, blow nozzle or pilot stage. It cannot drive a double-acting cylinder; specify the 5-port AirTAC 4V series for that.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC 3V106B-19 Solenoid Valve, 3V1 Series (3V106B19F)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.