Airtac 3V1 Solenoid Valve 3V106BI10F
The AirTAC Airtac 3V1 Solenoid Valve 3V106BI10F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port size1/8 in
- Coil voltageDC24V
- Electrical entryFlying lead (lead-out wire type)
- Stations10
- Series3V1
About the Airtac 3V1 Solenoid Valve 3V106BI10F
3V106BI10F is a factory-integrated manifold of ten 3V1 valves sharing one air supply, each a 3/2 direct-acting unit with spring return on a PT1/8 station port. Mounting ten valves in series on a single base strips out ten sets of individual plumbing and reclaims serious panel space.
Every station carries the same 3.0 W DC24V flying-lead coil, so a fully loaded terminal draws just 3.0 W per station from your 24 V rail. IP65 (DIN 40050) protection and a manual override on each valve keep commissioning and fault-finding simple.
Airtac 3V1 Solenoid Valve 3V106BI10F Technical Specifications
| Model | Airtac 3V1 Solenoid Valve 3V106BI10F |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | Flying lead (lead-out wire type) |
| Coil power | 3.0 W |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V1 Solenoid Valve 3V106BI10F
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| I | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 10F | 10 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V1 Solenoid Valve 3V106BI10F Is Used
Semiconductor fixture terminal
A ten-station terminal actuates ten single-acting clamps around a wafer test fixture, all fed from one common air inlet on the base.
Parcel sorting diverters
Each station fires a diverter finger that nudges parcels off a sorting conveyor into the right chute, then vents ready for the next parcel.
Packaging ejection fingers
High-cycle ejection fingers on a carton line kick rejected packs off the belt, with spring return resetting each finger between cartons.
Is the Airtac 3V1 Solenoid Valve 3V106BI10F the Right Part?
Ten stations is a lot of committed capacity, so size the body first: 3V1 has no published Cv, so confirm flow with us before locking in a 10-station terminal. When individual stations need more flow, 3V2 (1/8in and 1/4in, NC or NO selectable, Cv 0.18-0.19, vacuum rated) or 3V3 (1/4in, Cv 0.62) are the step-ups, and 3V2M is AirTAC's series where dense manifolding matters more than per-station flow. Confirm before ordering: port M5 or 1/8in; thread (PT standard; G and NPT to order); coil voltage; DIN plug or flying lead; and the exact station count - 1F to 20F are all available in the series. Double-acting cylinders need the 5-port AirTAC 4V series, and accessories such as the 3V1-P31 O-ring and long-screw set support base assembly.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V1 Solenoid Valve 3V106BI10F FAQ
Each station is a 3/2 direct-acting, spring-return valve rated 0-0.8 MPa (0-114 psi) and -20 to 70 C, sealed IP65 (DIN 40050). Coil power across the range: AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W, DC12V 2.5 W - all ten stations here run the 3.0 W DC24V coil. AirTAC publishes no Cv for the 3V1 body, so send us the flow question.
The series supports 1F to 20F, meaning 1 to 20 valves on one base; this code sits at ten. Counts beyond ten save even more plumbing but commit more ports to one thread standard, which here is PT1/8 - G and NPT are order options if your piping needs them. The 3V1-P30 connecting-screw base set and 3V1-P31 O-ring and long-screw set support assembly and service.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac 3V1 Solenoid Valve 3V106BI10F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.