Airtac 3V1 Solenoid Valve 3V106FI6F
The AirTAC Airtac 3V1 Solenoid Valve 3V106FI6F is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port size1/8 in
- Coil voltageDC12V
- Electrical entryFlying lead (lead-out wire type)
- Stations6
- Series3V1
About the Airtac 3V1 Solenoid Valve 3V106FI6F
Six valves in the space of a row of fittings: the 3V106FI6F joins six 3/2 direct-acting units on one manifold base with 1/8in PT ports, cutting plumbing joints and the leak points that go with them.
The coil is 12 V DC at 2.5 W and terminates in a flying lead, so cabinet wiring is a simple two-core run per station. Operation is spring return: energise to switch the outlet, de-energise and the spring vents it. Rated 0-0.8 MPa and -20 to 70 C, sealed to IP65, with a manual override on every station for setup. Order genuine AirTAC from the official catalogue via our quote desk.
Airtac 3V1 Solenoid Valve 3V106FI6F Technical Specifications
| Model | Airtac 3V1 Solenoid Valve 3V106FI6F |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | Flying lead (lead-out wire type) |
| Coil power | 2.5 W |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V1 Solenoid Valve 3V106FI6F
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| I | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 6F | 6 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V1 Solenoid Valve 3V106FI6F Is Used
Ribbon-loom thread-blow jets
Six air jets on a textile ribbon loom clear cut threads from the guides; the manifold's 1/8in PT ports tie into a single 12 V machine supply.
PCB tray dusting array
An electronics test cell pulses six nozzles across populated circuit-board trays; the IP65 coils shrug off the dusty air and each station is jogged via its manual override at setup.
Stamping part-kicker row
A high-cycle press line ejects finished shims with spring-return kicker cylinders; six direct-acting stations on one base keep the cycle plumbing short.
Is the Airtac 3V1 Solenoid Valve 3V106FI6F the Right Part?
Because AirTAC publishes no Cv for the 3V1, treat flow-critical applications with care and confirm them with us; this body exists for compact, low-power switching rather than high flow. When more flow per line is required, the natural steps up are 3V2 (1/8in and 1/4in, Cv 0.18-0.19, selectable NC or NO, vacuum rated) and 3V3 (1/4in, Cv 0.62), while 3V2M competes when dense manifolding outranks flow.
Five choices define your order: port size (M5 or 1/8in); thread - PT is the family default, with G and NPT available as catalogue options; coil voltage; DIN plug or flying-lead entry; and station count, which is six here. If the actuator is double-acting, the 5-port AirTAC 4V series is the correct route.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V1 Solenoid Valve 3V106FI6F FAQ
Full figure set: operating pressure 0-0.8 MPa (0-114 psi), temperature -20 to 70 C, protection IP65 (DIN 40050), air filtered to 40 um or finer without lubrication, and coil power AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W, DC12V 2.5 W - this assembly uses the 2.5 W DC12V coil. There is no published Cv for the 3V1, so verify flow-dependent duties with us.
The 3V106FI6F mounts six valve units in series on one base, so instead of six separately plumbed valves you get a single supply gallery, one mounting operation and fewer joints to seal. Accessories support the build: 3V1-P30 base screw set, 3V1-P31 O-rings with long screws, and the 3V1-P32 bracket set. Station counts from 1F to 20F exist if six is not the right number.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac 3V1 Solenoid Valve 3V106FI6F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.