Airtac 3V1 Solenoid Valve 3V1M5A1F
The AirTAC Airtac 3V1 Solenoid Valve 3V1M5A1F is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port sizeM5
- Coil voltageAC220V
- Electrical entryDIN plug (DIN socket type)
- Stations1
- Series3V1
About the Airtac 3V1 Solenoid Valve 3V1M5A1F
3V1M5A1F is the 1-station assembly of the 3V1 family: one direct-acting 3/2 valve with M5 port, pre-mounted on a series base. Single solenoid with spring return, and an AC220V coil that takes only 4.5 VA.
Because the valve sits on the series base used across the family, the same system is offered from 1 to 20 stations, so a machine can grow without redesigning the mounting. IP65 (DIN 40050) sealing, no-lubrication air filtered to 40 um, and a manual override round out the commissioning picture.
Airtac 3V1 Solenoid Valve 3V1M5A1F Technical Specifications
| Model | Airtac 3V1 Solenoid Valve 3V1M5A1F |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | M5 |
| Thread | PT |
| Coil voltage | AC220V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 4.5 VA |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V1 Solenoid Valve 3V1M5A1F
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| AC220V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 1F | 1 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V1 Solenoid Valve 3V1M5A1F Is Used
Small bench pneumatic presses
Drives the spring-return ram cylinder of a light-duty bench press used for staking or riveting small components.
Beverage filler gate actuation
Opens and vents the single-acting container gate on a small filler skid, with the series base leaving room for future stations.
Label applicator air puffs
Delivers a timed puff of air that seats labels onto cartons as they pass an applicator head on a packaging machine.
Is the Airtac 3V1 Solenoid Valve 3V1M5A1F the Right Part?
Because 3V1M5A1F arrives on a series base, the first question is where the manifold ends: the same system runs from 1 to 20 stations, so choose the count your panel has room for. On flow, be candid - AirTAC publishes no Cv for the 3V1, so confirm demanding duties with us. For more flow, step up to the 3V2 (1/8 and 1/4 ports, NC or NO selectable, Cv 0.18-0.19, vacuum rated) or the 3V3 (1/4, Cv 0.62); for the densest manifolds, compare the 3V2M. Double-acting actuators belong on the 5-port 4V series.
Five points to lock down: port (M5 or 1/8), thread (PT is standard, G and NPT are order options), coil voltage, DIN-plug or flying-lead entry, and the station count. Confirm the fixed initial state on the datasheet as well.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V1 Solenoid Valve 3V1M5A1F FAQ
It works from 0-0.8 MPa across -20 to 70 C with IP65 (DIN 40050) protection, and this assembly uses the AC220V coil at 4.5 VA. Other family coils are AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W and DC12V 2.5 W. AirTAC states no Cv or effective area for the 3V1, so verify flow needs with us.
It marks a 1-station series base: one complete valve pre-assembled on the manifold platform that the same family extends from 1 to 20 stations. Starting at 1F keeps the footprint minimal today while leaving a defined path to add positions without replumbing the panel.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac 3V1 Solenoid Valve 3V1M5A1F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.