Airtac 3V1 Solenoid Valve 3V1M5B13F
The AirTAC Airtac 3V1 Solenoid Valve 3V1M5B13F is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port sizeM5
- Coil voltageDC24V
- Electrical entryDIN plug (DIN socket type)
- Stations13
- Series3V1
About the Airtac 3V1 Solenoid Valve 3V1M5B13F
The AirTAC 3V1M5B13F brings thirteen 3/2 spring-return solenoid valves together on one M5 manifold base. Each position is direct-acting: energise the coil to switch the flow path, de-energise and the spring returns it. Use it to feed or vent single-acting actuators, air jets, clamps or a pilot line.
The DC24V coils use DIN plug entry and are sealed to IP65 (DIN 40050), so the bank suits dusty cabinet environments. A manual override on every station speeds up set-up and fault-finding. Each valve ships in one fixed initial state - verify it on the datasheet.
Airtac 3V1 Solenoid Valve 3V1M5B13F Technical Specifications
| Model | Airtac 3V1 Solenoid Valve 3V1M5B13F |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | M5 |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 3.0 W |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V1 Solenoid Valve 3V1M5B13F
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 13F | 13 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V1 Solenoid Valve 3V1M5B13F Is Used
Textile machine jet control
Air jets that clear lint and thread breaks on a spinning or weaving line switch individually, one valve position per jet.
Assembly jig clamp sequencing
Thirteen single-acting clamp cylinders on an assembly jig sequence from one manifold, venting to exhaust on release.
Cabinet-based pilot panels
The DIN plug entry and IP65 coils suit a control cabinet where each station pilots a larger process valve.
Is the Airtac 3V1 Solenoid Valve 3V1M5B13F the Right Part?
The 3V1 body trades flow for size and coil economy, and its catalogue lists no flow coefficient, so confirm any flow-sensitive duty with us before committing. Need more per valve? Step up to 3V2 (1/8in and 1/4in, NC or NO selectable, Cv 0.18-0.19, vacuum rated) or 3V3 (1/4in, Cv 0.62). If packing stations tightly is the priority over flow, compare the 3V2M manifold family. Driving a double-acting cylinder? That requires a 5-port valve from the AirTAC 4V series.
For the 3V1M5B13F, confirm: M5 port face, DC24V coil, DIN plug entry, thirteen stations on the shared base, and the factory initial state (stated on the datasheet). We can quote any count from 1F to 20F, or single valves.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V1 Solenoid Valve 3V1M5B13F FAQ
Per station: 3/2 direct-acting, single solenoid with spring return; 0-0.8 MPa (0-114 psi) operating pressure; -20 to 70 C; IP65 (DIN 40050). The DC24V coil takes 3.0 W, versus AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA or DC12V 2.5 W elsewhere in the 3V1 family. There is no published Cv or effective area for 3V1.
The 3V1 manifold concept runs from 1F to 20F on a shared base; this SKU is thirteen stations, and other counts or individual valves can be ordered. Each position is a 3/2 valve: three ports, two states, feeding or venting one line - so it suits single-acting cylinders, blow nozzles and pilot duty, not double-acting actuators (use the AirTAC 4V series there).
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac 3V1 Solenoid Valve 3V1M5B13F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.