Airtac 3V1 Solenoid Valve 3V1M5F4F
The AirTAC Airtac 3V1 Solenoid Valve 3V1M5F4F is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. It either feeds its outlet or vents it to exhaust, which is what makes it the valve for single-acting cylinders, on/off air blow, clamping, vacuum switching and pilot duty.
- Valve type3/2-way (3-port, 2-position)
- Port sizeM5
- Coil voltageDC12V
- Electrical entryDIN plug (DIN socket type)
- Stations4
- Series3V1
About the Airtac 3V1 Solenoid Valve 3V1M5F4F
Where panel depth is the constraint, four 3V1 3/2 valves on one M5 manifold do the work of four separate bodies in a fraction of the space. Each valve is direct acting with a single solenoid and spring return, feeding or venting a single line - exactly what a small clamp, a blow jet or a pilot stage needs. The DC12V coils take only 2.5 W each and plug into DIN sockets.
Keep the supply air filtered to 40 um or finer; the valve needs no lubrication. As with all 3V1 models, the initial state is fixed at the factory rather than selectable - verify it on the datasheet, then send us an RFQ for genuine AirTAC supply.
Airtac 3V1 Solenoid Valve 3V1M5F4F Technical Specifications
| Model | Airtac 3V1 Solenoid Valve 3V1M5F4F |
|---|---|
| Series | 3V1 |
| Valve type | 3/2-way (3-port, 2-position) |
| Function | Direct-acting, single solenoid, spring return |
| Port size | M5 |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | 2.5 W |
| Operating pressure | 0-0.8 MPa (0-114 psi) |
| Vacuum service | Not rated for vacuum |
| Flow coefficient | Not published for 3V1 |
| Temperature | -20 to 70 C |
| Construction | Direct-acting, single solenoid, spring return |
| Protection | IP65 (DIN 40050) |
| Medium | Air, filtered by a 40 µm or finer element. Lubrication not required. |
Figures follow the official AirTAC 3V1 catalogue. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Model Code: Airtac 3V1 Solenoid Valve 3V1M5F4F
| 3V1 | Body — sets the flow, the coil power and whether vacuum is rated. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| 4F | 4 stations in one assembly. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V1 Solenoid Valve 3V1M5F4F Is Used
Mini stamping jig
Four valves clamp four workpieces in a small stamping jig, each M5 outlet feeding a compact spring-return clamp cylinder.
Mobile service cart
A mobile HVAC service cart pulses test air through fittings from the 4-station block, the M5 ports matching its small hose barbs.
Nozzle timing rig
Engineers tune spray-nozzle pulse timing on a packaging line, switching individual air jets in sequence from one compact DC12V manifold.
Is the Airtac 3V1 Solenoid Valve 3V1M5F4F the Right Part?
Five decisions define the right 3V1 order: port (this code is fixed M5; thread variants PT, G and NPT belong to the 1/8" 06 port), coil voltage, entry style, valve-versus-manifold count, and initial state. Because no Cv is published for 3V1, treat it as a low-flow, low-power choice and confirm marginal duties with us before committing.
If the duty needs more air than M5 can pass, the natural ladder is 3V2 (1/8" and 1/4", Cv 0.18-0.19, NC or NO selectable, vacuum rated) or 3V3 (1/4", Cv 0.62), while 3V2M trades flow for the densest manifold layout in the range. A double-acting cylinder is outside this 3-port valve's job - route that requirement to the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Stay within 0-0.8 MPa (0-114 psi) operating pressure.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Blank any unused station on the base before pressurising.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V1 Solenoid Valve 3V1M5F4F FAQ
It operates at 0-0.8 MPa (0-114 psi), handles -20 to 70 C media and is sealed to IP65 (DIN 40050). Coil power varies with voltage: AC220V 4.5 VA, AC110V 4.5 VA, AC24V 5.0 VA, DC24V 3.0 W, DC12V 2.5 W; this model's DC12V coils draw 2.5 W. Supply air must pass a 40 um or finer element. No flow coefficient is published for 3V1, so verify flow-critical duties with us.
This SKU uses DIN plug entry - the coil unplugs from its socket, which makes coil swaps inside a manifold block quick. A flying-lead (lead-out wire) version of the same valve exists in the 3V1 family when pre-wired tails are preferred, and both entries meet IP65 when properly mated. If you also need a different coil voltage, state it in your RFQ; every voltage has its own catalogue power rating.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac 3V1 Solenoid Valve 3V1M5F4F
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.