AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM)
The AirTAC AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM) is a genuine 3-port 2-position (3/2) solenoid valve with 1/8 in ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port size1/8 in
- Coil voltageDC12V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM)
The 3V110-06NCF-AM is a genuine AirTAC 3/2 solenoid valve with a DC12V coil on a DIN plug and a 1/8in PT port. Normally closed, it keeps the outlet vented until energised - the fail-safe state for spring-return actuators that must retract when control power is lost.
Buying here is deliberately straightforward: the code tells you the state, port, voltage and entry, and we confirm anything else on request. Both states, five voltages, both electrical entries and the 3V-F manifold bases exist across the family. For pressure, flow and coil-power figures we go to the datasheet on request rather than publish numbers we cannot stand behind.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM) Technical Specifications
| Model | AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM) |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | 1/8 in |
| Thread | PT |
| Coil voltage | DC12V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM)
| 3V110 | Body. |
|---|---|
| 1/8 in | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| DC12V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM) Is Used
Fixture clamping
Pressurising a single-acting clamp on a milling fixture and letting the spring retract it whenever the 12V circuit drops out.
Gripper fail-safe on a bottling line
Holding a pneumatic gripper closed while powered and venting it on power loss, so bottles are released rather than crushed.
Test rig sequencing
Replacing a manual toggle in a benchtop test rig, letting the controller energise the valve through its DIN plug.
Is the AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM) the Right Part?
Start from the fail-safe question: if losing control power must vent your spring-return cylinder, the NC state in this code is correct; if it must keep feeding, order the NO variant. The DC12V coil suits a 12V control rail and cannot be rewired for another supply; the DIN plug accepts a standard connector. The 1/8in PT port is the standard thread on this family, with G and NPT offered as order options. Flow and pressure figures for 3V1 bodies are not published here - send an RFQ with your actuator size and we will confirm suitability from the datasheet. Where published numbers are required immediately, the documented AirTAC 3V2 and 3V3 3-port bodies are the better buy; for double-acting cylinders, move to the 5-port AirTAC 4V series. Individual valves can also be stacked on a 3V-F manifold base with one shared supply.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM) FAQ
Our documentation for the 3V1 family does not include published performance figures, so we confirm them individually: send an RFQ quoting 3V110-06NCF-AM and we will supply the datasheet values. Where you need figures published in advance, the AirTAC 3V2 and 3V3 3-port bodies are the fully documented options.
Choose NC (as here) when a power cut must vent the actuator, NO when it must keep the outlet fed - that single decision is the fail-safe logic of your circuit. For multiple valves on one machine, the 3V-F manifold bases carry several 3V bodies on a single shared air supply and wiring run, with valves ordered separately.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for AirTAC 3V110-06 Solenoid Valve, 3V100 Series (3V11006NCF-AM)
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.