Airtac 3V100 Solenoid Valve 3V110M5NCA-AM
The AirTAC Airtac 3V100 Solenoid Valve 3V110M5NCA-AM is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port sizeM5
- Coil voltageAC220V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the Airtac 3V100 Solenoid Valve 3V110M5NCA-AM
This 3V110M5NCA-AM is a normally closed 3/2 solenoid valve from AirTAC's 3V1 series with an M5 port and an AC220V coil. Three ports - supply, outlet, exhaust - and two states: energise the coil and air passes to the outlet; de-energise and the outlet vents. Normally closed means the resting, unpowered state blocks the outlet, so a lost control signal always leaves the actuator vented rather than fed.
It is a genuine AirTAC part, ordered here in the AC220V configuration that drops into a mains-powered control panel. The same body is catalogued with DC24V, AC110V, AC24V and DC12V coils, a normally open variant, flying-lead entries and 3V100M manifold bases. Anything not printed here - pressure range, flow, coil power - we will pull from the AirTAC datasheet the moment you ask.
Airtac 3V100 Solenoid Valve 3V110M5NCA-AM Technical Specifications
| Model | Airtac 3V100 Solenoid Valve 3V110M5NCA-AM |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | M5 |
| Thread | PT |
| Coil voltage | AC220V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V100 Solenoid Valve 3V110M5NCA-AM
| 3V110 | Body. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC220V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V100 Solenoid Valve 3V110M5NCA-AM Is Used
CNC fixture clamp
Hold a workpiece with a small spring-return clamp during a milling or drilling cycle, venting the clamp the moment the cycle ends or power drops.
Pilot for a larger process valve
Use the M5 outlet as the pilot signal that shifts a bigger air-operated valve on a process skid, with the vent port exhausting the pilot line when it switches off.
Small pneumatic lift on a jig
Raise a light single-acting ram that lifts or pushes a part into position; the spring returns it and the valve exhausts the air on de-energising.
Is the Airtac 3V100 Solenoid Valve 3V110M5NCA-AM the Right Part?
Work through the choices in order. State: normally closed blocks the outlet until the coil is energised, which is what most fail-safe circuits want; normally open does the opposite. Port: M5 is the smallest connection in the family and suits compact single-acting actuators, jets and pilot duty - step to 1/8in, 1/4in or 3/8in codes for larger actuators. Voltage: the A code fixes this coil at AC220V, and a coil built for one supply cannot be rewired to suit another.
On wiring, this version takes a DIN plug on the coil. Sizing is the one question we cannot answer from this page, because flow figures for the 3V1 family are not in our hands; send the actuator details and we will confirm against the datasheet. Buyers who need published flow and coil power immediately should look at the AirTAC 3V2 and 3V3 bodies, and a double-acting cylinder needs a 5-port valve from the AirTAC 4V range. PT thread is standard; G and NPT are available to order.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V100 Solenoid Valve 3V110M5NCA-AM FAQ
Yes. Give us the complete code and we will read the pressure range, flow and coil power from the AirTAC datasheet and come back to you with confirmed numbers. If your project needs documented figures up front, the AirTAC 3V2 and 3V3 series publish flow and coil power for every variant.
The A in the code builds the valve with an AC220V coil. Coils are fitted for one supply voltage and cannot be converted by rewiring, so match the code to your panel - DC24V, AC110V, AC24V or DC12V variants exist in the same family. If you also need the valve to pass air when unpowered, order the normally open version instead.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V100 Solenoid Valve 3V110M5NCA-AM
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.