Airtac 3V100 Solenoid Valve 3V110M5NCB-AM
The AirTAC Airtac 3V100 Solenoid Valve 3V110M5NCB-AM is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port sizeM5
- Coil voltageDC24V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the Airtac 3V100 Solenoid Valve 3V110M5NCB-AM
The 3V110M5NCB-AM is a 3-port, 2-position (3/2) solenoid valve in AirTAC's 3V1 body with an M5 port. Normally closed means the outlet stays vented until the coil is energised - air flows to the actuator only while power is applied, and the spring-return side of the circuit bleeds back to exhaust when it drops out. That fail-safe-to-vent behaviour is exactly what a single-acting clamp or blow nozzle usually needs.
This is a genuine AirTAC part. The 3V1 family is also offered in a normally open version, five coil voltages (AC220V, AC110V, AC24V, DC24V, DC12V), DIN plug or flying-lead entry, and on 3V-F manifold bases. Pressure, flow and coil power are not published on this page; send the RFQ and we will confirm them from the datasheet.
Airtac 3V100 Solenoid Valve 3V110M5NCB-AM Technical Specifications
| Model | Airtac 3V100 Solenoid Valve 3V110M5NCB-AM |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | M5 |
| Thread | PT |
| Coil voltage | DC24V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V100 Solenoid Valve 3V110M5NCB-AM
| 3V110 | Body. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| DC24V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V100 Solenoid Valve 3V110M5NCB-AM Is Used
Piloting a filling-head valve
Switching the pilot port of a larger process valve on a bottling line, where the pilot vents automatically whenever the 24V control rail drops.
CNC blow-off nozzle
An on/off air jet that clears chips from a machined feature on a small milling station; the nozzle goes dead and vents when the coil de-energises.
Spring-return clamp on a welding fixture
Feeding a single-acting clamp cylinder that releases to its spring the instant power is lost, keeping the jig safe between weld cycles.
Is the Airtac 3V100 Solenoid Valve 3V110M5NCB-AM the Right Part?
Choose NC when the outlet must go dead and vent if the 24V rail fails; choose NO only where air-on-power-loss is the safe condition. The M5 port is the smallest thread in the family and suits compact single-acting cylinders and light blow duty. The DC24V coil must be fed from a 24VDC supply - coil voltage is fixed at the factory and cannot be rewired - and this unit takes a DIN plug connection. Filtered air upstream of any solenoid valve keeps the seats clean. We do not hold flow figures for the 3V1 family, so ask us to check the valve against your actuator before ordering; if you need a 3-port valve with published flow and coil power today, the AirTAC 3V2 and 3V3 bodies carry full datasheet figures. Driving a double-acting cylinder? That takes a 5-port valve - see the AirTAC 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V100 Solenoid Valve 3V110M5NCB-AM FAQ
We do not publish performance data for the 3V1 family on this page. Send the RFQ and we will confirm the datasheet figures for the 3V110M5NCB-AM directly. If you need a documented 3-port valve right away, the AirTAC 3V2 (1/8in and 1/4in) and 3V3 (1/4in) bodies have published flow and coil-power figures.
No. A 3/2 valve feeds or vents a single outlet, which suits single-acting spring-return cylinders, blow duty and piloting. A double-acting cylinder needs pressure on both sides in turn, so specify a 5-port valve from the AirTAC 4V series instead.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V100 Solenoid Valve 3V110M5NCB-AM
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.