Airtac 3V100 Solenoid Valve 3V110M5NCC-AM
The AirTAC Airtac 3V100 Solenoid Valve 3V110M5NCC-AM is a genuine 3-port 2-position (3/2) solenoid valve with M5 ports. A 3/2 valve either feeds its outlet or vents it to exhaust, so it suits single-acting cylinders, air blow, clamping, vacuum switching and pilot duty. We stock this code and confirm its published figures from the datasheet on request.
- Valve type3/2-way (3-port, 2-position)
- Initial stateNormally closed
- Port sizeM5
- Coil voltageAC110V
- Electrical entryDIN plug (DIN socket type)
- Series3V110
About the Airtac 3V100 Solenoid Valve 3V110M5NCC-AM
The 3V110M5NCC-AM is an AirTAC 3/2 solenoid valve in the compact 3V110 body with an M5 thread - the smallest port in this family. Normally closed means the outlet is starved of air until the coil is energised with AC110V; supply then connects to the outlet, and when the coil drops out again the outlet vents through the exhaust. M5 suits miniature cylinders, small suction-cup circuits and compact air jets where a 1/8 inch fitting would simply add bulk.
You are buying a genuine AirTAC part in the normally closed state with an AC110V coil and DIN plug entry. The same 3V1 family also comes normally open, in AC220V, AC24V and DC12V coils, with flying-lead entry, and on 3V-F manifold bases. Datasheet figures such as operating pressure and coil power will be confirmed on request - send the code through an RFQ and we will read them back to you.
Airtac 3V100 Solenoid Valve 3V110M5NCC-AM Technical Specifications
| Model | Airtac 3V100 Solenoid Valve 3V110M5NCC-AM |
|---|---|
| Series | 3V110 |
| Valve type | 3/2-way (3-port, 2-position) |
| Initial state | Normally closed |
| Port size | M5 |
| Thread | PT |
| Coil voltage | AC110V |
|---|---|
| Electrical entry | DIN plug (DIN socket type) |
| Coil power | Confirm from the datasheet — ask us |
| Operating pressure | Confirm from the datasheet — ask us |
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
Model Code: Airtac 3V100 Solenoid Valve 3V110M5NCC-AM
| 3V110 | Body. |
|---|---|
| M5 | Port size. M5, 06 = 1/8 in, 08 = 1/4 in, 10 = 3/8 in. |
| NC | Normally closed: no air at the outlet until the coil is energised. |
| AC110V | Coil voltage. A = AC220V, B = DC24V, C = AC110V, E = AC24V, F = DC12V. |
| — | Electrical entry: I = flying lead, otherwise a DIN plug. |
| PT | Port thread. PT ships from stock; G and NPT are available to order. |
What a 3/2 Valve Does
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
Where the Airtac 3V100 Solenoid Valve 3V110M5NCC-AM Is Used
Small vacuum generator switch
On a compact electronics assembly head, the valve switches a venturi vacuum generator on and off to seat a small component on a nozzle before placement.
Sensor-cleaning air jet
A packaging line uses a short M5-threaded valve to pulse a fine air jet that clears dust from a label-sensor lens between cartons.
Miniature cylinder on a gauge fixture
A tiny single-acting cylinder lifts an inspection gate on a CNC measuring fixture, with M5 ports keeping the connecting block small.
Is the Airtac 3V100 Solenoid Valve 3V110M5NCC-AM the Right Part?
The M5 port defines what fittings connect and keeps the footprint tight; move up to 1/8 or 1/4 inch as the actuator grows. NC gives you a fail-safe of no outlet air on power loss; the normally open version of this body is in the family if the outlet must stay fed until energised. The AC110V coil must match your control supply exactly - coils are wound for one voltage and cannot be adapted by wiring. DIN plug entry takes a connector you wire and seat yourself, while flying-lead entry can be ordered for direct gland wiring. Where a panel of valves is planned, the 3V-F manifold bases carry several valves on one shared supply and make faults easier to isolate. We hold no published flow or coil-power data for this family, so let us size the valve against your actuator when you send the RFQ. Buyers who need a fully specified 3-port valve today can use the AirTAC 3V2 and 3V3 series, where those figures are published; double-acting cylinders belong on the 4V series.
Confirm before you order
- ✓ Port size and thread (PT from stock; G / NPT to order)
- ✓ Initial state — NC or NO, ordered up front
- ✓ Coil voltage matches your controller output
- ✓ Electrical entry — DIN plug or flying lead
- ✓ Single valve, bare base, or complete assembly
- ✓ Single-acting duty, not double-acting
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Match the coil voltage to your controller output.
- check Use the manual override to test before powering up.
- check Leave the exhaust port clear, or fit a silencer.
- check Wiring by qualified personnel, per AirTAC documentation.
Airtac 3V100 Solenoid Valve 3V110M5NCC-AM FAQ
Not from this page - we only publish figures we can trace to a datasheet, and none are in hand for the 3V1 family. We will pull operating pressure, flow and coil power from the AirTAC documentation on your RFQ. If published figures are a prerequisite today, the AirTAC 3V2 (1/8 and 1/4 inch) and 3V3 (1/4 inch) 3-port valves carry documented flow and coil-power data.
Decide what must happen when power is lost. If losing power must shut the air off, order normally closed; if it must leave the actuator fed, order normally open. Both states exist across the 3V1 family, and a 3/2 valve of either type cannot drive a double-acting cylinder - that takes the AirTAC 4V 5-port series.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 3V Valves
Request a Quote for Airtac 3V100 Solenoid Valve 3V110M5NCC-AM
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.