Airtac 3V2M Solenoid Valve 3V2MNCC-7F
2、Coaxial shut-off design ensures excellent sealing performance and high flow capacity; Requires no oil lubrication;
3、Equipped with manual override for simplified installation and commissioning;
4、Modular design with base mount enables multi-valve integration for space-saving configurations;
5、Centralized air supply and integrated wiring streamline troubleshooting during fault diagnosis;
6、Flexible and scalable configuration supports arbitrary combinations or expansion of valve quantities/types;
7、Dedicated base gasket design – Flipping the gasket does not allow NC/NO conversion.
Category: Solenoid Valves , Brand: AirTAC , Series: 3V2M
AirTAC 3V2MNCC-7F Solenoid Valve Technical Details
- Model: 3V2MNCC-7F
- Valve type: 3-way 2-position normally closed (direct-acting)
- Port configuration: 3 ports (P: pressure, A: outlet, R: exhaust)
- Port thread size: 1/8" NPT (G1/8 optional)
- Effective sectional area: 2.5mm²
- Operating pressure range: 0.05–0.7 MPa
- Proof pressure: 1.05 MPa
- Voltage variants: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Coil insulation class: Class F (155°C)
- Response time: ≤15ms (at 0.5MPa)
- Ambient temperature: -5℃ to 60℃ (no freezing)
- Fluid temperature: 0-60℃
- Seal material: Heat-resistant NBR (Nitrile Butadiene Rubber)
- Body material: Reinforced PBT resin with UL94 V-0 rating
- Protection class: IP67 (dustproof & waterproof)
- Weight: 170g ±5g (without connectors)
- Dimensions: 50mm(L) × 35mm(W) × 68mm(H) (including ports)
- Port alignment: 3-way inline configuration
High-speed switching solenoid valve with direct-acting mechanism, optimized for low-power consumption (1.2W typical). Features brass core tube for enhanced heat dissipation and stainless steel plunger for corrosion resistance. Compatible with compressed air or inert gases (ISO 8573-1 class 3). Requires 5μm filtration for optimal performance.
- High-cycle pneumatic grippers in robotics (200+ operations/min)
- Precision air control in SMT equipment
- Medical gas distribution systems
- Beverage dispensing machines
- Textile machinery tension control
- Laboratory pneumatic test benches
Installation guidelines:
Mount in vibration-free environment with 0.5-1Nm tightening torque.
Use PTFE tape on male threads only. For vertical installation,
ensure exhaust port faces downward. Lubricate with ISO VG32 turbine oil
if used in high-humidity environments.
Not recommended for:
Vacuum systems, flammable gases, or environments with strong electromagnetic interference.
Minimum 3,000 cycles required for run-in period.
| Property | Property Value |
|---|---|
| sku | 3V2MNCC-7F |
| Position | 3-Port 2-Position |
| Initial Position | Normally Closed |
| Standard Voltage | AC 110V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.