Airtac 3V2M Solenoid Valve 3V2MNCCI
2、Coaxial shut-off design ensures excellent sealing performance and high flow capacity; Requires no oil lubrication;
3、Equipped with manual override for simplified installation and commissioning;
4、Modular design with base mount enables multi-valve integration for space-saving configurations;
5、Centralized air supply and integrated wiring streamline troubleshooting during fault diagnosis;
6、Flexible and scalable configuration supports arbitrary combinations or expansion of valve quantities/types;
7、Dedicated base gasket design – Flipping the gasket does not allow NC/NO conversion.
Category: Solenoid Valves , Brand: AirTAC , Series: 3V2M
AirTAC 3V2MNCCI Solenoid Valve Technical Details
- Model: 3V2MNCCI (Full designation: 3V2M-NC-CI)
- Valve type: 3-port/2-position normally closed (direct acting)
- Port thread: G1/8 (ISO228 standard) with optional NPT1/8
- Effective area: 8.5mm² (pilot orifice diameter)
- Operating pressure range: 0.05–1.0 MPa (7-145 PSI)
- Voltage variants: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Coil insulation class: Class F (155℃)
- Power consumption: DC2.8W / AC3.5VA
- Response time: ≤15ms (excitation), ≤20ms (de-energization)
- Ambient temperature: -5℃ to 60℃ (non-freezing)
- Fluid temperature: 0-60℃ (lubricated air recommended)
- Seal material: Heat-resistant NBR (Nitrile)
- Body material: Die-cast aluminum alloy (anodized)
- Protection grade: IP65 (dust-tight & water jet resistant)
- Weight: 215g ±5g (without connectors)
- Dimensions: 52mm(L) × 36mm(W) × 68mm(H) (excluding ports)
- Port spacing: 18mm between centers (G1/8 ports)
- Mounting orientation: Any (horizontal/vertical recommended)
High-speed solenoid valve optimized for industrial automation, featuring brass core tube for enhanced magnetic efficiency and PTFE piston guides for smooth operation. The low-hysteresis design maintains consistent flow rates (±3% deviation) across 500,000+ cycles. Requires ISO 8573-1:2010 Class 3.4.2 compressed air (max 5mg/m³ oil content).
- High-cycle pneumatic punching machines (30-60 operations/sec)
- Textile machinery thread control systems
- Semiconductor wafer handling robotics
- Beverage canning line diverters
- 3D printer pneumatic tool changers
Maintenance protocol:
Perform blow-down cleaning every 500 operating hours using dry nitrogen.
Replace internal filter element (P/N: F3V2M-01) annually. Lubricate with
ISO VG32 turbine oil if operated below -10℃.
| Property | Property Value |
|---|---|
| sku | 3V2MNCCI |
| Position | 3-Port 2-Position |
| Initial Position | Normally Closed |
| Standard Voltage | AC 110V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.