Airtac 3V2M Solenoid Valve 3V2MNCCI-11F
2、Coaxial shut-off design ensures excellent sealing performance and high flow capacity; Requires no oil lubrication;
3、Equipped with manual override for simplified installation and commissioning;
4、Modular design with base mount enables multi-valve integration for space-saving configurations;
5、Centralized air supply and integrated wiring streamline troubleshooting during fault diagnosis;
6、Flexible and scalable configuration supports arbitrary combinations or expansion of valve quantities/types;
7、Dedicated base gasket design – Flipping the gasket does not allow NC/NO conversion.
Category: Solenoid Valves , Brand: AirTAC , Series: 3V2M
AirTAC 3V2MNCCI-11F Solenoid Valve Technical Details
- Model: 3V2MNCCI-11F
- Valve type: 3-way, 2-position normally closed (direct-acting)
- Port configuration: 3V2M (IN/OUT/EXHAUST)
- Port size: PT1/8 (G1/8 equivalent)
- Thread standard: ISO 228/1 (BSPP)
- Operating pressure range: 0.05–1.0 MPa
- Proof pressure: 1.5 MPa
- Flow capacity: 850 l/min (Cv=1.3)
- Voltage tolerance: ±10%
- Voltage variants:
- DC12V (3W)
- DC24V (3.5W)
- AC110V 50/60Hz (4.2VA)
- AC220V 50/60Hz (4.5VA)
- Response time: ≤15ms (actuation), ≤10ms (release)
- Seal material: Heat-resistant NBR (Nitrile Butadiene Rubber)
- Body material: Anodized aluminum alloy (ADC12)
- Ambient temperature: -5℃ to 60℃ (with no condensation)
- Fluid temperature: 0℃ to 60℃
- Protection class: IP67 (dustproof & temporary immersion)
- Weight: 210g ±5g (without connector)
- Dimensions: 52mm(L) × 38mm(W) × 68mm(H)
- Port alignment: 15mm center-to-center spacing
- Manual override: Built-in push-button (non-locking type)
High-flow miniaturized solenoid valve featuring low power consumption and rapid switching capabilities. The anodized body resists chemical corrosion and features an integrated silencer (30dB noise reduction). Designed for 10 million+ cycle durability with ≤0.1 sec/cycle switching frequency. Requires ISO 8573-1:2010 Class 3 compressed air (max 5mg/m³ oil content).
- High-speed pneumatic actuators in SMT machinery
- Vacuum generator control for pick-and-place robots
- Cooling system diverters in laser cutting equipment
- Precision air control in semiconductor wafer handling
- Mobile hydraulic systems in agricultural drones
Installation guidelines:
Mount in vibration-free environment (max 10m/s² acceleration).
Use M3x8mm stainless steel screws with 0.4-0.6Nm torque.
Maintain 15° maximum deviation from vertical orientation.
Pipe joints require 2-3 wraps of PTFE tape (do not over-tighten).
| Property | Property Value |
|---|---|
| sku | 3V2MNCCI-11F |
| Position | 3-Port 2-Position |
| Initial Position | Normally Closed |
| Standard Voltage | AC 110V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.