Airtac 3V2M Solenoid Valve 3V2MNCFI
2、Coaxial shut-off design ensures excellent sealing performance and high flow capacity; Requires no oil lubrication;
3、Equipped with manual override for simplified installation and commissioning;
4、Modular design with base mount enables multi-valve integration for space-saving configurations;
5、Centralized air supply and integrated wiring streamline troubleshooting during fault diagnosis;
6、Flexible and scalable configuration supports arbitrary combinations or expansion of valve quantities/types;
7、Dedicated base gasket design – Flipping the gasket does not allow NC/NO conversion.
Category: Solenoid Valves , Brand: AirTAC , Series: 3V2M
AirTAC 3V2MNCFI Solenoid Valve Technical Details
- Model: 3V2MNCFI
- Function: 3/2-way normally closed (direct-acting)
- Port configuration: G1/8 (ISO228/1 standard)
- Pressure range: 0.1–1.0 MPa (14.5–145 PSI)
- Voltage variants: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Power consumption: DC: 2.5W max | AC: 3.2VA max
- Response time: ≤15ms (energize) / ≤20ms (de-energize)
- Flow capacity: 750 l/min (Cv=1.2 at 0.5MPa)
- Seal material: Heat-resistant NBR (Nitrile), replaceable cartridge design
- Ambient temperature: -5℃ to 80℃ (with 0.5mm particle filter recommended above 60℃)
- Protection class: IP67 (dust-tight & protected against temporary immersion)
- Weight: 220g ±5% (with coil)
- Dimensions: 52mm(L) × 38mm(W) × 72mm(H) (excluding connectors)
- Port thread depth: 12mm (minimum engagement recommended)
High-cycle valve with industrial-grade epoxy coating, featuring copper-free aluminum alloy body for corrosion resistance. The dual-chamber design prevents pressure locking, while the encapsulated solenoid coil ensures moisture resistance. Requires 5-40μm filtration and automatic drain maintenance for optimal performance.
- High-speed sorting/pick-and-place robotics (200+ cycles/min)
- Electroplating line pneumatic controls (acid vapor environments)
- Beverage filling systems with CIP (Clean-in-Place) protocols
- Railway brake test bench simulations
- Lithium battery production dry room automation
Installation protocol:
Mount with M4 screws (1.2-1.5Nm torque). Maintain ≥15mm clearance
below valve for maintenance access. Use shielded cables for EMI
protection in sensitive environments. Lubricate only with ISO VG32
pneumatic oil if required.
| Property | Property Value |
|---|---|
| sku | 3V2MNCFI |
| Position | 3-Port 2-Position |
| Initial Position | Normally Closed |
| Standard Voltage | DC212V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.