2、Coaxial shut-off design ensures excellent sealing performance and high flow capacity; Requires no oil lubrication;
3、Equipped with manual override for simplified installation and commissioning;
4、Modular design with base mount enables multi-valve integration for space-saving configurations;
5、Centralized air supply and integrated wiring streamline troubleshooting during fault diagnosis;
6、Flexible and scalable configuration supports arbitrary combinations or expansion of valve quantities/types;
7、Dedicated base gasket design – Flipping the gasket does not allow NC/NO conversion.
Category: Solenoid Valves , Brand: AirTAC , Series: 3V2M
AirTAC 3V2MNOAI-1F Solenoid Valve Specifications
- Model: 3V2MNOAI-1F
- Type: 3/2-way normally open (direct-acting)
- Port size: PT1/4 (G1/8 optional)
- Operating pressure: 0.1–1.0 MPa
- Voltage options: DC12V, DC24V, AC110V, AC220V (±10% tolerance)
- Weight: 200g ±5% (without connector)
- Dimensions: 55mm(L) × 35mm(W) × 70mm(H)
- Seal material: Heat-resistant NBR (Nitrile) rubber
- Temperature range: -20℃ to 80℃ (non-freezing)
- Power consumption: ≤2.2W (DC), ≤3.5VA (AC)
- Flow coefficient (Cv): 1.2
- Response time: ≤15ms (open/close cycle)
- Protection rating: IP67 (dust/water resistant)
- Electrical connection: DIN43650 Form A connector
- Valve body material: Reinforced PBT with fiberglass
High-flow solenoid valve optimized for rapid cycling applications, featuring dual-coil protection against voltage spikes. The hardened stainless steel plunger ensures 2 million+ cycle durability. Compatible with compressed air and inert gases (N2/CO2). Requires 5μm filtration with oil mist lubrication recommended for high-frequency use.
- High-speed packaging line actuators
- Beverage dispensing systems
- Textile machinery air controls
- PCB assembly pneumatic tools
- Automated test equipment (ATE) fixtures
| Property | Property Value |
|---|---|
| sku | 3V2MNOAI-1F |
| Position | 3-Port 2-Position |
| Initial Position | Normally Open |
| Standard Voltage | AC220V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.





