Airtac 3V2M Solenoid Valve 3V2MNOB-8F
2、Coaxial shut-off design ensures excellent sealing performance and high flow capacity; Requires no oil lubrication;
3、Equipped with manual override for simplified installation and commissioning;
4、Modular design with base mount enables multi-valve integration for space-saving configurations;
5、Centralized air supply and integrated wiring streamline troubleshooting during fault diagnosis;
6、Flexible and scalable configuration supports arbitrary combinations or expansion of valve quantities/types;
7、Dedicated base gasket design – Flipping the gasket does not allow NC/NO conversion.
Category: Solenoid Valves , Brand: AirTAC , Series: 3V2M
AirTAC 3V2MNOB-8F Solenoid Valve Technical Specifications
- Model: 3V2MNOB-8F
- Valve type: 3/2-way normally open (direct-acting)
- Port configuration: PT1/8 (G1/8 adaptor available)
- Effective area: 8mm²
- Operating pressure range: 0.05-0.8 MPa
- Proof pressure: 1.2 MPa
- Voltage variants: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Coil insulation class: Class F (155℃)
- Power consumption: DC: 1.8W max | AC: 2.2VA max
- Response time: ≤15ms (excitation) / ≤20ms (de-excitation)
- Ambient temperature: -5℃ to 60℃ (non-freezing)
- Fluid temperature: 0-60℃
- Seal material: Heat-resistant NBR (Nitrile Butadiene Rubber)
- Body material: Reinforced PBT resin with glass fiber
- Protection rating: IP67 (coil)/IP40 (valve body)
- Weight: 185g ±3%
- Dimensions: 52mm(L) × 34mm(W) × 66mm(H) (excluding connectors)
- Port thread depth: 10mm
- Cycle rate: ≤5Hz (with approved lubrication)
High-speed 3/2-way solenoid valve optimized for low-power systems requiring rapid cycling. Features dual-chamber design for reduced pressure loss and enhanced flow efficiency (Cv=0.12). The brass core tube with special coating ensures 1,000,000+ cycles lifespan. Compatible with vacuum applications (down to -100kPa). Requires ISO 8573-1:2010 Class 4 compressed air (max 5mg/m³ oil content).
- High-speed sorting/pick-and-place robotics
- Semiconductor wafer handling systems
- Textile machinery air-jet controls
- Automated liquid dispensing systems
- Laboratory analytical instrument gas control
- Battery manufacturing automation
Installation guidelines:
Mount with DIN43650 Form A connector facing downward. Maintain ≥15mm clearance
from heat sources. Use M3.5 mounting screws (max torque 0.8N·m). For horizontal
mounting, install drip-proof cover (accessory code: DP-8F). Pre-lubricate with
ISO VG32 turbine oil if operating below 0.3MPa.
| Property | Property Value |
|---|---|
| sku | 3V2MNOB-8F |
| Position | 3-Port 2-Position |
| Initial Position | Normally Open |
| Standard Voltage | DC24V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.