The AirTAC AirTAC 3V300M2FT Manifold Base 2-Station 3/2 NPT is a genuine 3V-F manifold base manifold base for 2 stations on one shared air supply. A base is a machined block: it carries no coil and no solenoid, so the valves that sit on it are ordered separately.
The 3V300M2FT is a machined manifold base in the AirTAC 3V300M series, drilled for two 3/2 solenoid valves on a single block. A manifold base carries one common air supply to both stations, so instead of running separate supply lines and separate wiring drops to two individual valves, you mount both valves on one base and feed them together. The T at the end of the code means this base is supplied with NPT thread, which is the order option to ask for when your pipework is NPT rather than the manufacturer's standard PT.
We stock this base as a genuine AirTAC part and ship it with the rest of your order. Remember that a base on its own is not a working valve: it has no coil, no voltage and no switching state, and the valves that sit on it are ordered separately as 3V3x0 series SKUs. If you need a figure from the datasheet for this family, such as port sizing details for the mating valves, send us an RFQ and we will read it off the manufacturer document for you.
| Model | AirTAC 3V300M2FT Manifold Base 2-Station 3/2 NPT |
|---|---|
| Series | 3V-F manifold base |
| Item form | Manifold base (no coil, no solenoid, no initial state) |
| Stations | 2 |
| Port size | Confirm from the datasheet — ask us |
| Thread | NPT |
| Operating pressure | Confirm from the datasheet — ask us |
|---|---|
| Flow coefficient | Confirm from the datasheet — ask us |
| Temperature | Confirm from the datasheet — ask us |
| Protection | Confirm from the datasheet — ask us |
| 3V-F manifold base | Body. |
|---|---|
| 2F | 2 stations in one assembly. |
| NPT | Port thread. PT ships from stock; G and NPT are available to order. |
A 3/2 valve has three ports — supply, outlet and exhaust — and two states. It either feeds the outlet or vents it to exhaust, and that is the whole job.
That makes it the right valve for a single-acting (spring-return) cylinder, on/off air blow, a clamp, switching a vacuum generator or suction cup, and piloting a larger valve.
It cannot run a double-acting cylinder. A double-acting cylinder needs air alternately on two sides, which takes a 5-port valve — the AirTAC 4V series.
A fixture with a spring-return clamp cylinder and a separate air-blast chip clear sits at one spot on the machine. Mounting both 3/2 valves on one 2-station base means one air feed and one wiring route serve both functions.
Where two individual valves have each needed their own supply fitting and cable gland, replacing them with valves on a shared manifold base consolidates the plumbing and makes fault-finding a matter of checking one base instead of two piped bodies.
An older plant machine plumbed throughout in NPT takes a replacement manifold without adapter fittings when the base itself is ordered in NPT, as this 3V300M2FT version is.
Two things decide whether this base is right for your build. First, count your valves: the 2F code gives you two stations, so this suits a machine with exactly two 3/2 functions at one location, such as a clamp and a blow-off. Second, check your thread: this version is NPT, while the family default is PT and G is also available as an option, so match the base to your existing fittings. Pair it with 3V3x0 valves in the NC or NO state, the coil voltage that matches your panel supply, and the DIN plug or flying-lead entry your wiring scheme expects.
One caution on sizing: our stock records tell us what this base is, but we do not hold published flow figures for the 3V1x0 / 3V2x0 / 3V3x0 valve family that mounts on it, so ask us to confirm valve sizing against your actuator before you commit. If you need a 3-port valve with fully published flow and coil-power figures today, look at the documented 3V2 or 3V3 direct-acting bodies instead. If your actuator is a double-acting cylinder, a 3/2 valve cannot drive it either way; you need a 5-port valve from the AirTAC 4V series.
Confirm before you order
For the 3V1x0 / 3V2x0 / 3V3x0 family we can confirm the pressure range, flow, coil power and other datasheet figures on request, since we check them against the manufacturer document rather than publishing numbers we cannot stand behind. If you need a 3-port valve with published figures available immediately, the documented 3V2 and 3V3 direct-acting bodies carry them openly.
No valves are included: the base is the machined manifold block only, with no coil, voltage or switching state of its own, and you order the 3V3x0 valves for its two stations separately. And no single 3/2 valve can drive a double-acting cylinder, since that needs a 5-port valve; use the AirTAC 4V series for that job.
Genuine AirTAC parts produced by the AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.