Airtac 4V100 Solenoid Valve 4V110M5AI-AM
The AirTAC Airtac 4V100 Solenoid Valve 4V110M5AI-AM is a genuine 5/2-way single solenoid (spring return) solenoid valve with AM ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
- Valve type5/2-way
- FunctionSingle solenoid (spring return)
- Port sizeAM
- Effective area10.2 mm²
- Flow (Cv)0.6
- Series4V100
About the Airtac 4V100 Solenoid Valve 4V110M5AI-AM
This 4V110M5AI-AM build saves wiring time: the AirTAC 4V110 single-solenoid 5/2 valve comes with a grommet (DIN-style) lead-out terminated in a 0.5 m flying wire, so it plugs toward your terminal strip without opening a terminal box. Pneumatically it is the compact M5-port version, shifting a double-acting cylinder or actuator on energise and letting the internal spring snap the spool back on de-energise. Flow is 10.2 mm2 effective area, Cv 0.6, up to 5 cycles per second for O16-32 mm bores.
The AC220V coil draws just 3.5 VA and reacts in 0.05 s or less inside a 120 g aluminum body rated IP65 (DIN40050), and the valve still stacks onto the 4V100 manifold base despite the moulded lead. Air is filtered by a 40 um element and the valve runs dry, with no lubricator needed upstream.
Airtac 4V100 Solenoid Valve 4V110M5AI-AM Technical Specifications
| Model | Airtac 4V100 Solenoid Valve 4V110M5AI-AM |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | AM |
| Exhaust port | AM |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 120 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
Flow & Coil Options
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
Model Code: Airtac 4V100 Solenoid Valve 4V110M5AI-AM
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -AM | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
Where the Airtac 4V100 Solenoid Valve 4V110M5AI-AM Is Used
Bowl-feeder escapement on a small-parts feeder
A 0.5 m pre-wired lead reaches the feeder's junction box without extra cable work; the spring-return 5/2 cycles an O16 escapement finger (about 10 kgf at 0.5 MPa) up to 5 times per second.
Reject pusher at a packaging inspection station
A camera-triggered O32 pusher (~41 kgf at 0.5 MPa) is served by the Cv 0.6 flow path; the 0.05 s shift time keeps reject timing aligned with the sensor, and spring return parks the pusher clear.
Lid press on a medical-kit filling bench
A light O20 press cylinder pressing lulls a kit lid shut with ~16 kgf; M5 ports let the valve sit directly on a compact manifold beside the fixture, and the grommet lead keeps 220 V wiring tidy.
Is the Airtac 4V100 Solenoid Valve 4V110M5AI-AM the Right Valve?
Within the 4V100 family M5 is the floor, so the only smaller move is a different valve class; the closest sibling up is the 4V110-06 with 1/8in PT ports at the same Cv 0.6, and the next body up is the 4V200 with Cv 1.0 for bores above O32 mm or faster cycling. Cylinder sizing sanity check at 0.5 MPa: an O16 bore pushes about 10 kgf, an O25 about 25 kgf, both inside this valve's flow class.
If your cabinet favours conduit instead of flying leads, order the same valve with terminal-box entry instead of the I suffix. For a drop-in replacement, match all five variables: 4V100 body, function 10, M5 port, voltage code A (AC220V), and grommet entry.
Quick checklist
- ✓ Required flow (Cv) for cylinder & speed
- ✓ Function: single / double / 5-3 center
- ✓ Coil voltage (DC24 / AC220 …)
- ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
- ✓ Single valve or manifold base?
Installation & Wiring Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 0.8 MPa operating pressure.
- check Match coil voltage to your controller output.
- check Use the manual override to test before powering.
- check Fit silencers or fittings to the exhaust ports.
- check Wiring by qualified personnel per AirTAC docs.
Airtac 4V100 Solenoid Valve 4V110M5AI-AM FAQ
Effective area 10.2 mm2 (Cv 0.6), maximum frequency 5 cycles per second, switching response 0.05 s or less, operating pressure 0.15-0.8 MPa against a 1.2 MPa proof pressure, IP65 coil housing, -20 to +70 C ambient, 120 g body weight, AC220V coil at 3.5 VA with a 0.5 m grommet lead.
The I suffix on this SKU means a moulded grommet with a 0.5 m flying wire: fastest installation and easy coil replacement, best for distributed valves on manifolds. A terminal-box version accepts fixed conduit wiring, which suits panels needing formal cable containment. Electrically the AC220V 3.5 VA coil behaves identically in both entries.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC 4V Valves
Request a Quote for Airtac 4V100 Solenoid Valve 4V110M5AI-AM
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.