AirTAC 6TV110M5NOF200 Solenoid Valve Technical Details

• Full model code: 6TV110M5NOF200
• Valve type: 5/2-way single solenoid (pilot-operated)
• Port configuration: M5 threaded ports (main ports) + PT1/8 (pilot port)
• Operation mode: Monostable with spring return
• Effective bore diameter: Ø2.5mm (main ports)
• Operating pressure range: 0.15–1.0 MPa (21–145 PSI)
• Max flow capacity: 750 NL/min (at 0.5 MPa)
• Voltage specification: DC24V (±10%)
• Power consumption: 1.6W (standard coil)
• Response time: ≤15ms (energize)/≤20ms (de-energize)
• Seal material: FKM (Viton®) fluorocarbon rubber
• Ambient temperature: -10℃ to 60℃ (with anti-condensation measures)
• Protection class: IP67 (dust tight, protected against temporary immersion)
• Weight: 320g ±5% (including coil)
• Dimensions: 98mm(L) × 30mm(W) × 45mm(H) (excluding connectors)
• Port alignment: ISO 15218 standard compliant
• Cycle life: ≥10 million cycles (at rated conditions)

High-flow miniaturized 5/2-way valve with enhanced dust/water resistance, featuring low-hysteresis spool movement for precise pneumatic control. The balanced spool design maintains stable operation even with pressure fluctuations. Requires filtered (≤40μm) and lubricated air (ISO VG32 or equivalent).

Industrial Implementation Scenarios:

• Multi-position actuator control in SMT component placement machines
• Pneumatic gripper sequencing for robotic assembly lines
• Dusty environment operations: Foundry equipment valve clusters
• Medical device sterilization chamber door mechanisms
• High-cycle packaging machine diverters (≤3Hz operation)

Mounting protocol: For vertical installation (preferred orientation), ensure exhaust ports face downward. Apply thread sealant only on male ports (PT1/8), not M5 connections. Allow 15mm clearance around exhaust silencers for proper venting.

Service advisory: Perform quarterly lubrication checks in high-cycle applications (>500,000 cycles/month). Use only AirTAC-recommended grease (PN: L-AG25) for manual relubrication.