Airtac ACED Double-acting Compact Cylinder ACED100X175B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X175B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X175B
A double acting compact cylinder built to ISO 21287, the ACED100X175B pushes a 100 mm bore through a 175 mm stroke with a rod leaving BOTH covers. Because each side sees the rod-side area, output is 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa in either direction - there is no weaker pull stroke. The through-rod resists rotation and side load, and the rear rod end can carry a sensor flag while the front rod does the work.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body will not fit. At 0.5 MPa, plan on roughly 2260 N (about 230 kg) of usable vertical lift for a real margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, the S45C hard-chrome rod takes side load, and the male B-code rod thread bolts straight to your tooling. Speed range is 30-500 mm/s.
Airtac ACED Double-acting Compact Cylinder ACED100X175B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X175B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X175B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X175B Is Used
Pneumatic press station
The 3769.9 N both-way force at 0.5 MPa suits a 100 mm bore crimping or staking head on an electronics assembly line, with the 175 mm stroke clearing part load-out.
Reciprocating transfer arm
Equal force in push and pull makes the double rod ideal for a shuttle that must index a pallet back and forth at identical speed and thrust.
Vertical lift-and-lower module
The through-rod resists rotation on a packaging machine's drop-down stamper, and the rear rod carries a flag for position feedback when the -S magnet is ordered.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X175B the Right Cylinder?
At 3769.9 N per direction at 0.5 MPa, this 100 mm bore sits between the 80 mm size (2356.2 N) and the 125 mm size (5890.5 N). If your load needs a held position with air off, add a rod lock or pilot check - this cylinder will drift. The 175 mm stroke is well inside the 300 mm standard limit for bore 100, and FA/FB flange or LB foot brackets mount on the ISO 21287 face. Note: this code has no magnet, so CMSE / DMSE switches need the -S version.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X175B FAQ
Because a rod exits both covers, output is identical in both directions: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, equal to about 384 kgf and 538 kgf. At full 1.0 MPa the rod-side area reaches 768.8 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight machine frames. The B code gives a male 20 mm rod thread on both ends, a fixed TPU bumper sits at each end of stroke, and the 1/4" PT ports suit the 100 mm bore. FA/FB flange and LB foot brackets bolt to the standard face. The magnet is the optional -S code - without it no CMSE / DMSE switch can be fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X175B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.