Airtac ACED Double-acting Compact Cylinder ACED100X275B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X275B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke275 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X275B
A double acting compact cylinder built to ISO 21287, the ACED100X275B pushes a 100 mm bore through a 275 mm stroke with a rod leaving BOTH covers. Because each side sees the rod-side area, output is identical in both directions: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, peaking at 768.8 kgf at 1.0 MPa. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag or a second tooling plate.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 275 mm stroke fits deep slides and gantries where a full-length body will not. A hard-anodized aluminium body runs on an S45C hard-chrome rod, with a fixed TPU bumper at each end. As a working rule, plan on roughly 2262 N of usable push at 0.5 MPa, which is about 192 kg lifted vertically with a 2:1 margin. Operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Airtac ACED Double-acting Compact Cylinder ACED100X275B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X275B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X275B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X275B Is Used
Pallet stacker eject
The 275 mm stroke ejects a full layer from a pallet stack in a warehouse depalletizer, with 3769.9 N available in both directions so the return stroke clears the lane just as hard.
Press-to-fit axle bushing
An automotive subassembly line uses the through-rod to press axle bushings home from one side while the rear rod drives an ejector pin, replacing two separate cylinders.
Battery tray transfer
In a forklift battery swap station, the symmetric double rod pushes a 190 kg tray onto the charger cradle and retracts it with equal force, guided by the rotation-resistant through-rod.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X275B the Right Cylinder?
At 3769.9 N per direction, bore 100 sits between bore 80 (2356.2 N) and bore 125 (5890.5 N) at 0.5 MPa. If your load is under about 2262 N of real work, bore 80 saves air and space; if you need more than 3800 N, step up to 125. The B code gives a male M12x1.75 rod thread on both ends. This unit ships without a magnet - order the -S code instead if you want CMSE / DMSE switch positions. Remember the piston drifts when air is lost, so add a rod lock or pilot check for held loads. FA/FB flange and LB foot brackets bolt to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X275B FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal both ways: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, with a maximum of 768.8 kgf at 1.0 MPa. It runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, at 30-500 mm/s and -20 to +70 C, with a 1.5 MPa (215 psi) proof pressure.
The B code gives a male M12x1.75 thread on both rod ends, on a 20 mm hard-chrome S45C rod, with a 1/4" PT port and fixed TPU bumpers at each end. Sensing is not fitted as standard: order the -S variant to get the optional magnet that lets CMSE or DMSE switches read position along the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X275B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.