Airtac ACED Double-acting Compact Cylinder ACED100X275SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X275SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke275 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X275SB
A double acting, double-rod ISO 21287 compact cylinder, the ACED100X275SB pushes a 100 mm bore through a 275 mm stroke with a rod leaving both covers. Because both strokes work on the rod-side area, output is identical each way: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag or a second tool. In practice, plan on roughly 2262 N (about 230 kg) of usable work at 0.5 MPa, or lift about 192 kg vertically with a 2:1 margin.
The hard-anodized aluminium body with an S45C hard-chrome-plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into long-travel gantries and press frames where a full-length body would not fit. Fixed TPU bumpers absorb end-of-stroke shock at both ends, and the fitted -S magnet accepts CMSE / DMSE switches for position feedback.
Airtac ACED Double-acting Compact Cylinder ACED100X275SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X275SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X275SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X275SB Is Used
Pallet stacker lift column
The symmetric 3769.9 N output raises and lowers a stacked pallet fixture in a warehouse elevator gantry, with the 275 mm stroke covering three layer heights and the through-rod keeping the platform level.
Billet ejector on a forging press
A rear-rod push knocks hot steel billets off the die table; equal force both ways means the return stroke clears the next billet at the same 5277.9 N available at 0.7 MPa.
Wide-web web tension roller
A dancer arm on a paper converting line mounts to the front rod while the back rod carries a CMSE switch flag (magnet fitted via the -S code), holding constant web tension at 30-500 mm/s.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X275SB the Right Cylinder?
At 3769.9 N per direction, this bore sits between the 80 mm frame (2356.2 N at 0.5 MPa) and the 125 mm frame (5890.5 N at 0.5 MPa); step down for lighter clamping, up when 5277.9 N at 0.7 MPa is still short of the job. The 275 mm stroke is within the 300 mm standard limit for bore 100, so no made-to-order build is needed. The B code gives a male M12x1.75 rod thread; FA/FB flange, LB foot or FTC brackets bolt to the ISO 21287 face. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X275SB FAQ
Yes - the double-rod design works on the rod-side area both ways, so output is equal each direction: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, peaking at 768.8 kgf at 1.0 MPa. A practical working figure is about 2262 N (roughly 230 kg) at 0.5 MPa, or about 192 kg of vertical lift with a 2:1 margin. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, on air filtered to 40 um.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 275 mm stroke fits inside frames a full-length body would overflow. Fixed TPU bumpers at both ends absorb end-of-stroke impact. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots for end-of-stroke or mid-stroke signalling; FA/FB flange, LB foot and FTC mounts bolt straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X275SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.