Airtac ACED Double-acting Compact Cylinder ACED25X90SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED25X90SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø25mm bore and 90mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke90 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED25X90SB
A double acting compact cylinder built to ISO 21287, the ACED25X90SB pushes a 25 mm bore through a 90 mm stroke with a rod leaving both covers. Because each side sees the rod-side area, output is a matched 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in either direction, and the through-rod shrugs off rotation and light side load. The male rod thread from the B code bolts straight to your tooling.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit. Practical sizing: plan on roughly 124 N (about 12.6 kgf) of real work at 0.5 MPa, or expect it to lift about 10 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke shock, the S code means the magnet is already fitted for CMSE / DMSE switches, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED25X90SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED25X90SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED25X90SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED25X90SB Is Used
Symmetric push-pull jig clamping
Equal 206.2 N force on extend and retract lets one cylinder both seat and release an aluminium machined part in a drilling fixture without recalibrating the clamp.
Position-flagged transfer slide
The fitted -S magnet and a back-end rod carrying a flag give CMSE or DMSE switch feedback on a 90 mm shuttle stroke inside a compact assembly gantry.
Lab vial press and lift
About 10 kg of vertical lift with a 2:1 margin suits stoppering or pressing small vial trays in a compact benchtop packaging or test station.
Is the Airtac ACED Double-acting Compact Cylinder ACED25X90SB the Right Cylinder?
At 206.2 N per direction this bore sits between the 20 mm frame (117.8 N at 0.5 MPa) and the 32 mm frame (345.6 N), so pick it when a fixture needs balanced force on both strokes plus a back-end rod for a sensor flag. The 90 mm stroke is well inside the 150 mm standard limit for bore 25. Remember the piston drifts if air is lost - add a rod lock or pilot check where a load must stay put. FA/FB flange, LB foot, CA clevis and FTC brackets mount on the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches out of the box.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED25X90SB FAQ
It is a double-rod cylinder, so force is identical on both strokes: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa (rod-side area each way). At 1.0 MPa the ceiling is 42.0 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 short body cuts mounting length by roughly half versus an ISO 15552 profile cylinder, with a hard-anodized aluminium barrel, S45C hard-chrome rod, M5x08 ports (M5x0.8) and fixed TPU bumpers at both ends. The B code gives a male 10 mm rod thread, and the S code means the magnet is fitted, so CMSE / DMSE switches mount directly. FA flange, LB foot, CA clevis and FTC brackets bolt to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED25X90SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.