Airtac ACED Double-acting Compact Cylinder ACED32X10S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X10S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X10S
A double acting compact cylinder with a rod leaving both covers, the ACED32X10S pushes with equal force in each direction because both strokes work on the rod-side area: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. The 10 mm stroke suits short clamp-and-release moves, and the through-rod resists rotation and light side load while the rear rod end can carry a sensor flag. Speed range is 30-500 mm/s over an operating pressure of 0.15-1.0 MPa (22-145 psi).
The body is a hard-anodized aluminium ISO 21287 compact barrel with an S45C hard-chrome-plated rod and a fixed TPU bumper at each end. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures. This S-coded unit carries the optional -S magnet, so CMSE / DMSE switches can be clipped on for end-of-stroke signalling, and the 1/8" port keeps plumbing simple. At 0.5 MPa the usable push is roughly 207 N once you plan for a 0.6 derating factor.
Airtac ACED Double-acting Compact Cylinder ACED32X10S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X10S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X10S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X10S Is Used
Short-stroke clamping on CNC fixtures
The 10 mm stroke is ideal for swing-away clamps and part-hold-downs on a 3-axis milling fixture, where 345.6 N per side holds aluminium blanks without deforming them.
Position-verified ejector on an assembly line
Because the -S magnet is fitted, CMSE or DMSE switches confirm extend and retract on a pallet ejector, and the rear rod drives a flag for a photo-eye check.
Symmetric push-pull in a test rig
Equal 345.6 N output in both directions lets a leak-test station push a sealing plate onto a port and retract it with identical force, keeping cycle loads balanced.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X10S the Right Cylinder?
Size up or down from here: a 25 mm bore gives 206.2 N at 0.5 MPa, while a 40 mm bore raises that to 571.8 N. If your part weighs under about 17 kg, this cylinder lifts it vertically with a 2:1 margin at 0.5 MPa. Note that with no rod lock or pilot check the piston will drift if air is lost, so add one for held loads. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face; the female M8x1.25 rod thread takes standard accessories directly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X10S FAQ
As a double-rod cylinder the force is equal in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Both strokes use the rod-side area because a 12 mm rod exits each cover.
The ISO 21287 body is hard-anodized aluminium about 50% shorter in mounting length than an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to soften end-of-stroke contact. The S in the model code means the optional -S magnet is fitted, so CMSE / DMSE switches can be mounted in the body slots for stroke-end detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.