Airtac ACED Double-acting Compact Cylinder ACED32X110S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X110S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X110S
Double acting with a rod leaving both covers, the ACED32X110S pushes with the same 345.6 N at 0.5 MPa (483.8 N at 0.7 MPa) in either direction, because both strokes work on the rod-side area of the 32 mm bore. The through-rod resists rotation and light side load, and the rear rod end can carry a sensor flag or a second tooling plate. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clipped onto the body slots for end-of-stroke signalling.
The body is a hard-anodized aluminium ISO 21287 compact build with an S45C hard-chrome-plated rod, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight guarding and gantry frames. Fixed TPU bumpers absorb end-of-stroke shock at both ends, speed runs 30-500 mm/s, and pressure spans 0.15-1.0 MPa (22-145 psi). As a working rule, plan on roughly 207 N of real work at 0.5 MPa, which lifts about 17 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED32X110S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X110S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X110S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X110S Is Used
Reciprocating transfer slide
The rear rod drives a return plate or flag while the front rod carries the part nest, so one 110 mm stroke serves both sides of a small pick-and-place gantry at equal 345.6 N force.
Press-fit station in tight guarding
With about 50% of the mounting length of an ISO 15552 profile cylinder saved, the compact body fits inside a light-duty press fixture for snap-fitting electrical connectors, backed by the 483.8 N @0.7 MPa rating.
Position-verified clamping of PCB fixtures
The fitted -S magnet lets CMSE or DMSE switches confirm full clamp and full retract on a PCB test fixture, with the through-rod keeping the clamp pad square under light side load.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X110S the Right Cylinder?
At 345.6 N @0.5 MPa this bore sits between the 25 mm size (206.2 N) and the 40 mm size (571.8 N); step up to 40 mm if your fixture needs more margin, or down to 25 mm to save space. The 110 mm stroke is well inside the 200 mm standard range for bore 32, so it ships as a catalogue item. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Mounting: FA/FB flanges, LB foot and FTC brackets bolt to the ISO 21287 face, with I/Y rod knuckles on the female M8x1.25 thread; PT ports at 1/8".
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X110S FAQ
Output is equal both ways because a rod exits each cover and both strokes use the rod-side area of the 32 mm bore: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi) air pressure, proof tested to 1.5 MPa (215 psi).
It is an ISO 21287 compact cylinder - about 50% shorter in mounting length than an ISO 15552 profile cylinder - with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. This ACED32X110S already carries the optional -S magnet, so CMSE or DMSE switches mount directly in the body slots; FA/FB flange, LB foot and FTC mounting plus I/Y knuckles fit the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.