Airtac ACED Double-acting Compact Cylinder ACED32X70
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X70 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 70mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X70
The ACED32X70 is a double acting compact cylinder built to ISO 21287: a piston rod exits both covers of the hard-anodized aluminium body, so the 32 mm bore delivers the same 345.6 N at 0.5 MPa (483.8 N at 0.7 MPa) whether it pushes or pulls. The S45C hard-chrome rod is 12 mm and the female M8x1.25 thread on each end takes standard rod knuckles. Air ports are 1/8" and the stroke of 70 mm sits well inside the 200 mm maximum standard stroke for this bore.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs and guarding where a full-length body will not fit. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag on a pick-and-place arm. A fixed TPU bumper at each end absorbs end-of-stroke shock. For positioning feedback, order the -S code to add the optional magnet for CMSE / DMSE switches - without -S there is no magnet. At 0.5 MPa, plan on roughly 207 N of usable work, and the rod will lift about 17 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED32X70 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X70 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X70
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X70 Is Used
Symmetric jig clamping
The through-rod lets a fixture clamp from the front while the rear rod drives a position flag, with 345.6 N of equal force on both strokes of the 70 mm travel.
Reciprocating transfer slide
Equal push and pull at 483.8 N at 0.7 MPa suits a 70 mm shuttle between two stations on a small assembly machine, running 30-500 mm/s.
Light press or eject station
With about 207 N of practical work force at 0.5 MPa, the ACED32X70 ejects small stamped parts or presses light inserts in a compact cell.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X70 the Right Cylinder?
Size both ways: the 25 mm bore gives 206.2 N at 0.5 MPa, while the 40 mm bore reaches 571.8 N - step up if your tooling weight or clamping force exceeds about 207 N of practical load on this 32 mm bore. Both directions output the same force because the rod-side area works on each stroke. Note that this cylinder does not hold position when air is lost; for a held vertical load, pair it with a rod lock or pilot check valve. Mounting: FA/FB flange, LB foot or FTC brackets bolt to the ISO 21287 face, with I and Y rod knuckles for the double rod. Add -S to the order code if CMSE / DMSE switch detection is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X70 FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area of the 32 mm bore: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, equal push and pull. At 1.0 MPa the maximum output is 70.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
The ISO 21287 short body cuts about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow gantries and tight fixtures. Sensing is optional: order the -S code to have the magnet fitted for CMSE / DMSE switches; without -S there is no magnet. A fixed TPU bumper at each end absorbs end-of-stroke shock, and FA/FB flange, LB foot or FTC mounting bolts straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X70
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.