Airtac ACED Double-acting Compact Cylinder ACED40X25SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED40X25SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø40mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ40 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED40X25SB
A double acting compact cylinder built to ISO 21287, the ACED40X25SB pushes a 40 mm bore piston through a 25 mm stroke with a rod leaving BOTH covers. Because each side works on the rod-side area, output is identical in either direction: 571.8 N at 0.5 MPa and 800.5 N at 0.7 MPa, with a peak of 116.6 kgf at 1.0 MPa. The male-threaded 12 mm rod (the B code) bolts straight into tooling, and the through-rod resists rotation and side load while the rear rod can carry a sensor flag.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight clamping fixtures and guarded stations. A hard-anodized aluminium body carries an S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke shock at both ends, and the fitted -S magnet lets CMSE / DMSE switches report position. At 0.5 MPa the rod side delivers 571.8 N, which lifts about 29 kg vertically - halve that for a 2:1 margin and you can safely raise a 14 kg part. Speed range is 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED40X25SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED40X25SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø40mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 572 N |
| 0.7 MPa | 800 N |
| Max (@1.0 MPa) | 117 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED40X25SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED40X25SB Is Used
Clamp-and-present station
The 25 mm stroke presses a locating pin into a machined aluminium housing with 571.8 N at 0.5 MPa, then retracts with identical force because the rod-side area works both ways.
Bottling line reject pusher
Symmetric double-rod output kicks underfilled bottles off a conveyor in either stroke direction, while the fitted -S magnet and a DMSE switch confirm home position between bottles.
Fixture counterbalance rod
The rear 12 mm rod of the through-rod carries a sensor flag on a drill-head fixture, giving position feedback and a symmetric mount in half the length of an ISO 15552 profile cylinder.
Is the Airtac ACED Double-acting Compact Cylinder ACED40X25SB the Right Cylinder?
Pick this model when you need equal push and pull of roughly 571.8 N at 0.5 MPa over a short 25 mm stroke with a male rod thread for direct tooling attachment. If your load is lighter, the ACED32X25SB gives 345.6 N at 0.5 MPa on the same compact footprint; if you need more muscle, step up to the ACED50X25SB at 881.2 N. Remember the piston drifts if air is lost, so pair it with a rod lock or pilot check for held loads. FA/FB flanges, LB feet and FTC brackets mount on the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches out of the box.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED40X25SB FAQ
Yes - the double-rod design means a rod exits both covers, so every stroke uses the rod-side area of the 40 mm bore. Output is 571.8 N at 0.5 MPa and 800.5 N at 0.7 MPa in EITHER direction, peaking at 116.6 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for tight jigs and guarded machines. This SB variant carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots. FA/FB flanges, LB feet and FTC brackets bolt to the standard face, the male-threaded rod attaches directly to tooling, and fixed TPU bumpers at both ends soften end-of-stroke impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED40X25SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.