Airtac ACED Double-acting Compact Cylinder ACED63X10S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X10S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X10S
A double acting compact cylinder with a rod leaving both covers, the ACED63X10S pushes 1458.1 N and pulls 1458.1 N at 0.5 MPa because each stroke works on the rod-side area. The 10 mm stroke suits short indexing moves, and the through-rod resists rotation while the rear rod end can carry a sensor flag. Running on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, it travels 30-500 mm/s.
The hard-anodized aluminium body is an ISO 21287 short build that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures. A fixed TPU bumper sits at each end of travel. At 0.5 MPa the rod-side force equals roughly 148 kgf, so halving for a 2:1 margin lets this cylinder lift about 74 kg vertically. The fitted -S magnet accepts CMSE / DMSE switches for end-position sensing.
Airtac ACED Double-acting Compact Cylinder ACED63X10S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X10S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X10S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X10S Is Used
Short-stroke press fitting
A 10 mm stroke with 1458.1 N at 0.5 MPa presses bearings or bushings into aluminium housings on an electronics assembly line without wasting machine envelope.
Symmetric push-pull indexing
The through-rod gives equal 1458.1 N output in both directions, ideal for a reciprocating shuttle that advances and retracts pallets on a packaging conveyor with identical force.
Position-sensed clamping
With the fitted -S magnet, CMSE / DMSE switches confirm clamp-open and clamp-closed states on a CNC fixture, while the rear rod end carries a second flag or linkage.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X10S the Right Cylinder?
For this force class the 63 mm bore delivers 1458.1 N both ways at 0.5 MPa; step down to a 50 mm bore (881.2 N) for lighter clamps or up to an 80 mm bore (2356.2 N) for heavier press work. The 10 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so it ships as a standard build. Remember the piston drifts if air is lost - add a rod lock or pilot check where a load must stay put. FA/FB flange, LB foot and FTC brackets bolt to the ISO 21287 face, and the female M10x1.5 rod thread takes standard I or Y knuckles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X10S FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal either way: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow gantries and guarded cells. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount directly in the body slots; a fixed TPU bumper absorbs end-of-stroke energy at both ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.