Airtac ACED Double-acting Compact Cylinder ACED63X10SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X10SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X10SB
A double acting compact cylinder built to ISO 21287, the ACED63X10SB pushes a 63 mm piston over a short 10 mm stroke with a rod leaving both covers. Because each side sees the rod-side area, output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa in either direction - no push/pull imbalance. The male rod thread (B code) and fitted -S magnet make it drop-in ready for switch-equipped fixtures.
The hard-anodized aluminium body with an S45C hard-chrome rod runs 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), with fixed TPU bumpers at both ends. For sizing, treat roughly 875 N (about 89 kgf) as the practical working force at 0.5 MPa; with a 2:1 margin that lifts about 44 kg vertically. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guards.
Airtac ACED Double-acting Compact Cylinder ACED63X10SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X10SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X10SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X10SB Is Used
Press die locating
The short 10 mm stroke and 1458.1 N equal push/pull seat die blocks in a stamping press before the main ram closes, with the male rod thread taking a custom platen.
Twin-cylinder gantry lift
Two ACED63X10SB units on a pick-and-place gantry share the load symmetrically; the through-rod resists rotation while CMSE switches on the fitted magnet confirm end positions.
Fixture clamping bridge
A clamping bridge on an indexing machining fixture strokes 10 mm to lock aluminum housings, gaining about 875 N of usable force at 0.5 MPa.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X10SB the Right Cylinder?
At 1458.1 N per direction this bore 63 unit suits mid-load clamping and sync work; step down to bore 50 (881.2 N) for lighter dies or up to bore 80 (2356.2 N) for heavy presses. The 10 mm stroke is well inside the 250 mm standard range for this bore. Remember the through-rod does not hold position if air is lost - add a rod lock or pilot check for a suspended load. FA/FB flanges, LB feet and I/Y knuckles bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X10SB FAQ
Output is equal both ways because a rod exits each cover and both strokes use the rod-side area: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
It is an ISO 21287 compact cylinder - about 50% shorter in mounting length than an ISO 15552 profile cylinder - with a hard-anodized aluminium body, S45C hard-chrome rod, 1/8" PT ports and fixed TPU bumpers at both ends. This model carries the optional -S magnet, so CMSE or DMSE reed/solid-state switches mount directly in the body slots. Mounting options include FA/FB flanges, LB feet and I/Y rod knuckles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.