Airtac ACED Double-acting Compact Cylinder ACED63X30
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X30 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X30
The ACED63X30 is a double acting compact cylinder built to ISO 21287, with a piston rod leaving BOTH covers so the 63 mm bore delivers 1458.1 N at 0.5 MPa in either direction - both strokes work on the rod-side area, so push and pull are always equal. The 16 mm through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag on gantry axes. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s, with a fixed TPU bumper at each end to absorb end-of-stroke shock.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight welding fixtures and machine guards where a full-length body will not reach. The hard-anodized aluminium body carries a roller-burnished bore, and the S45C hard-chrome plated rod stands up to high-cycle pallet clamping. FA/FB flanges, LB feet and FTC brackets bolt straight to the standard face. Note that without air the piston drifts - for a held load add a rod lock or pilot check valve.
Airtac ACED Double-acting Compact Cylinder ACED63X30 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X30 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X30
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X30 Is Used
Symmetric press fixture
The equal 1458.1 N push and pull at 0.5 MPa lets one ACED63X30 both clamp and retract a steel locating nest in a machining cell without a return spring or unequal force sizing.
Reciprocating transfer slide
A through-rod at each cover drives a slide between hard stops on a small-parts conveyor, the rear rod carrying a flag for a switch when the -S magnet option is ordered.
Packaging machine pusher
The 30 mm stroke kicks cartons off a cross conveyor at up to 500 mm/s, and the short body fits inside the guard where an ISO 15552 profile cylinder is too long.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X30 the Right Cylinder?
At 0.5 MPa this bore gives 1458.1 N either way; if your jig needs less, the ACED50 delivers 881.2 N, and if you need more the ACED80 reaches 2356.2 N. Plan on roughly 875 N (about 89 kg of thrust) for real work rather than the full rating, and remember the load will drift if air is lost - spec a rod lock where position must hold. Order the -S code if you want the optional magnet for CMSE / DMSE switches; without it no sensor can be fitted. Female M10x1.5 rod thread, 1/8" PT ports, standard strokes to 250 mm for this bore.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X30 FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal both ways: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) and proof pressure is 1.5 MPa (215 psi).
It is an ISO 21287 compact body about 50% shorter in mounting length than an ISO 15552 profile cylinder, with FA/FB flange, LB foot and FTC bracket options on the standard face. A fixed TPU bumper at each end absorbs end-of-stroke energy. Position is not held when air is lost - add a rod lock or pilot check for a suspended load. The magnet is the optional -S code; only with it can CMSE / DMSE switches be used.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.