Airtac ACED Double-acting Compact Cylinder ACED63X45B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X45B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke45 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X45B
A double acting ISO 21287 compact cylinder with a rod leaving both covers, the ACED63X45B delivers 1458.1 N in either direction at 0.5 MPa because both strokes work on the rod-side area of the 63 mm bore. At 0.7 MPa that rises to 2041.3 N each way, with a ceiling of 297.4 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures where a full-length body cannot.
The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag on a transfer line. The hard-anodized aluminium body pairs with an S45C hard-chrome-plated rod, and fixed TPU bumpers absorb end-of-stroke energy. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED63X45B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X45B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X45B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X45B Is Used
Reciprocating transfer shuttle
The equal 1458.1 N force in both directions moves a pallet back and forth on a pick-and-place gantry, with the rear rod driving a position flag for the PLC.
Press-fit stamping station
At 0.7 MPa the 2041.3 N rod-side force presses bushings into aluminium housings on an automotive subassembly line, the 45 mm stroke matching the fixture depth.
Bidirectional pusher on packaging line
A carton diverter needs identical push and pull, so the double-rod output kicks boxes either way at 30-500 mm/s between conveyor lanes.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X45B the Right Cylinder?
For this 45 mm stroke and 1458.1 N class, a 50 mm double-rod unit gives 881.2 N at 0.5 MPa while a step up to 80 mm reaches 2356.2 N, so the 63 mm bore sits squarely in the mid-load band. Remember that a plain double-rod cylinder drifts when air is lost; add a rod lock or pilot check if the load must stay put. The B code gives a male rod thread for direct attachment to tooling, and FA/FB flange, LB foot or FTC brackets bolt to the ISO 21287 face. If you need position feedback, order the -S variant so CMSE or DMSE switches can ride the magnet slots; this model without -S carries no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X45B FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area of the 63 mm bore: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal in each direction. The maximum output is 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
It is an ISO 21287 compact cylinder, roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. The B code gives a male rod thread. FA/FB flange, LB foot and FTC brackets fit the standard face. For sensing, order the optional -S magnet code, which allows CMSE or DMSE switches; without -S there is no magnet in the piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X45B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.