Airtac ACED Double-acting Compact Cylinder ACED63X50B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X50B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X50B
A double acting compact actuator built to ISO 21287, the ACED63X50B pushes a 63 mm bore through a 50 mm stroke with a piston rod leaving BOTH covers. Because each side sees the rod-side area, output is identical either way: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. The through-rod fights rotation and side load, and the free back-end rod is a handy place to hang a sensor flag or a second tooling plate.
The hard-anodized aluminium body with an S45C hard-chrome rod runs on 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s, with a fixed TPU bumper at each end. The short ISO 21287 body takes roughly half the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and gantries. Need position signals? Order the optional -S magnet code to enable CMSE / DMSE switches; this model ships without a magnet.
Airtac ACED Double-acting Compact Cylinder ACED63X50B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X50B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X50B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X50B Is Used
Press-fit bushing insertion
The symmetric 1458.1 N output at 0.5 MPa presses bushings into pump housings from either side, and the 50 mm stroke matches short press-fit travel.
Two-sided weld fixture clamping
A rod at each cover clamps a bracket from both ends of a jig, keeping the fixture symmetric where a single-rod cylinder would pull off-axis.
Reciprocating slide drive
Equal force both directions drives a pick-and-place slide at 30-500 mm/s, with the back rod carrying a switch flag when the -S magnet is ordered.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X50B the Right Cylinder?
At 1458.1 N per side at 0.5 MPa, the 63 mm bore suits clamping and pressing in the 80-120 kg class. Step down to the 50 mm bore (881.2 N) for lighter nests, or up to the 80 mm bore (2356.2 N) when the job needs more muscle. Remember the piston drifts if air is lost - add a rod lock or pilot check for a held load. Mount with FA/FB flange, LB foot or FTC brackets plus I/Y rod knuckles, and add the -S code if CMSE / DMSE sensing is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X50B FAQ
Both directions equally, because a rod exits each cover and both strokes use the rod-side area: 1458.1 N at 0.5 MPa, 2041.3 N at 0.7 MPa, and a maximum of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), speed 30-500 mm/s, and a 63 mm bore on a 50 mm stroke with a 16 mm rod and 1/8" port.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow guards and tight jigs. A fixed TPU bumper at each end absorbs end-of-stroke shock. Mounting options include FA/FB flange, LB foot and FTC brackets with I/Y rod knuckles. Position sensing needs the optional -S magnet code, which enables CMSE / DMSE switches - without -S there is no magnet in the piston.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X50B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.