Airtac ACED Double-acting Compact Cylinder ACED80X200S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X200S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X200S
A double acting compact cylinder with a rod leaving both covers, the ACED80X200S delivers 2356.2 N at 0.5 MPa in each direction because both strokes work on the rod-side area. The 80 mm bore and 200 mm stroke suit heavy clamping and press-fit stations that need symmetric push and pull from one body. Air supply runs 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and speed spans 30-500 mm/s.
The hard-anodized aluminium body is an ISO 21287 compact design, saving about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press frames and gantry fixtures. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the through-rod resists rotation while the rear rod can carry a sensor flag. The fitted -S magnet lets CMSE / DMSE switches report position. As a rule of thumb, plan on roughly 1414 N of usable work at 0.5 MPa, which lifts about 120 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED80X200S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X200S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X200S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X200S Is Used
Press-fit stations
The 2356.2 N both-ways force presses bearings or bushings into housings on an assembly line, with the 200 mm stroke reaching deep into a fixture frame.
Pallet clamp arms
Equal push and pull lets one cylinder both grip and release pallets or totes on a packaging line, with the through-rod keeping the clamp arm square.
Gantry Z-lift with position feedback
The fitted -S magnet and CMSE / DMSE switches confirm up and down positions on a gantry that lifts about 120 kg parts vertically with margin.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X200S the Right Cylinder?
At 2356.2 N per side (3298.7 N at 0.7 MPa, up to 480.5 kgf at 1.0 MPa), this bore covers heavy clamps and short-stroke presses. Step down to the ACED63 for 1458.1 N jobs or up to the ACED100 for 3769.9 N. The 200 mm stroke sits inside the 300 mm standard range for bore 80, so no made-to-order build is needed. Remember the piston drifts if air is lost - add a rod lock or pilot check for held loads. FA/FB flange, LB foot and FTC brackets bolt to the ISO 21287 face, and the -S magnet is already fitted for CMSE / DMSE switching.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X200S FAQ
Because a rod exits both covers, force is equal in both directions: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa on each stroke, peaking at 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so FA/FB flange or LB foot mounts fit shallow frames. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped onto the body slot for end-of-stroke signals. A fixed TPU bumper at each end absorbs stop shock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.