Airtac ACED Double-acting Compact Cylinder ACED80X25S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X25S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 25mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke25 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X25S
A double acting, double-rod compact cylinder built to ISO 21287, the ACED80X25S pushes and pulls with the same 2356.2 N at 0.5 MPa (3298.7 N at 0.7 MPa) because a rod exits both covers and each stroke works on the rod-side area. The 80 mm bore carries a 20 mm hard-chrome-plated S45C rod, and the short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and machine frames.
The through-rod resists rotation and side load and gives a symmetric mount, while the rear rod can carry a sensor flag on packaging or assembly machinery. A fixed TPU bumper at each end absorbs end-of-stroke energy, and because the -S magnet is fitted you can bolt CMSE or DMSE switches straight onto the body slots. At 0.5 MPa the usable work force is roughly 1414 N (about 60% of rating), which lifts around 72 kg vertically with a 2:1 margin - enough to match real part weights before you order.
Airtac ACED Double-acting Compact Cylinder ACED80X25S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X25S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X25S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X25S Is Used
Reciprocating transfer arm
The through-rod gives equal 2356.2 N force on extend and retract, so a pick-and-place arm on an electronics assembly line cycles at the same speed and power in both directions between 30 and 500 mm/s.
Position-flagged press station
With the -S magnet fitted, CMSE or DMSE switches read end-of-stroke on a 25 mm short-stake staking or riveting station where the compact body must fit inside a machine guard.
Vertical guide column
The rear rod of the double-rod design carries a counterweight or sensor flag on a lift column, while the 80 mm bore handles about 72 kg of vertical load with a 2:1 margin at 0.5 MPa.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X25S the Right Cylinder?
Size both ways: if 2356.2 N at 0.5 MPa is more than your job needs, the ACED63 delivers 1458.1 N at the same pressure; if you need more, step up to the ACED100 for 3769.9 N. Both neighbors share the same compact ISO 21287 footprint family, so re-sizing rarely forces a fixture redesign.
This model ships with the optional -S magnet already fitted, so CMSE / DMSE switches work out of the box. Mounting: FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face. Remember that a plain double-rod cylinder drifts when air is lost - for a held load add a rod lock or pilot check valve. Air supply: 0.15-1.0 MPa (22-145 psi), filtered to 40 um; speed range 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X25S FAQ
Yes - because a rod exits both covers, both strokes use the rod-side area. At 0.5 MPa you get 2356.2 N in either direction, at 0.7 MPa you get 3298.7 N both ways, and the maximum rating at 1.0 MPa is 480.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and the speed range is 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits tight guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount directly in the body slots; without the -S code there is no magnet. Mounting options include FA/FB flange, LB foot, FTC and I/Y rod knuckles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.