Airtac ACED Double-acting Compact Cylinder ACED80X300
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X300 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 300mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke300 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X300
A double acting, double-rod compact cylinder built to ISO 21287, the ACED80X300 pushes a 20 mm rod out of both covers, so thrust is identical on the extend and retract stroke: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa each way. The 80 mm bore runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-500 mm/s, with a fixed TPU bumper at each end of the 300 mm travel.
The hard-anodized aluminium body with a hard-chrome S45C rod keeps the envelope short - roughly 50% of the mounting length of an ISO 15552 profile cylinder - which is why it slots into presses, lifters and gantries where a full-length body will not fit. The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag. Plan on about 1414 N of usable work at 0.5 MPa, which is roughly a 120 kg vertical lift with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED80X300 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X300 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X300
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X300 Is Used
Pallet stacker lift head
The 2356.2 N rod-side thrust both ways raises a pallet press plate of about 120 kg with a 2:1 margin, and the 300 mm stroke covers a full layer cycle.
Bench-top crimp press
Equal 3298.7 N force at 0.7 MPa on approach and return suits a wire-terminal crimping head where the through-rod keeps the tooling square under side load.
Reciprocating spray gantry
A rear rod carrying a sensor flag drives a paint or wash nozzle carriage back and forth at 30-500 mm/s inside a guard too tight for a long-body cylinder.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X300 the Right Cylinder?
At 80 mm bore you sit near the top of the ACED range: 2356.2 N both ways at 0.5 MPa, versus 1458.1 N for a 63 mm and 3769.9 N for a 100 mm. Step down to 63 mm if the load is under about 875 N of real work, step up to 100 mm for heavier lifts. Because the piston drifts when air is lost, add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face; this code has no magnet, so order ACED80X300S if you need CMSE or DMSE switches. Rod thread is female M12x1.75, port 1/4" PT.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X300 FAQ
Because a rod exits both covers, output is the same extending and retracting: 2356.2 N at 0.5 MPa, 3298.7 N at 0.7 MPa, and up to 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C. For real work budget about 1414 N, roughly a 120 kg vertical lift with a 2:1 margin.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated 20 mm rod through both ends, and a fixed TPU bumper at each stroke end that only decelerates - it never holds a load. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. This ACED80X300 code has no magnet, so no sensor can be mounted; order the optional -S magnet version to run CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X300
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.