Airtac ACED Double-acting Compact Cylinder ACED80X80SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X80SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X80SB
A double acting compact cylinder built to ISO 21287, the ACED80X80SB pushes an 80 mm bore through an 80 mm stroke with a rod leaving BOTH covers. Because each stroke works on the rod-side area, output is identical either way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa. The male-threaded 20 mm rod (B code) bolts straight into tooling, and the through-rod resists rotation and side load while the rear rod end can carry a sensor flag or a second fixture.
In practice that 2356.2 N means about 1414 N of usable work at 0.5 MPa, or roughly 144 kg - and for vertical duty the same force lifts about 120 kg with a 2:1 margin. The hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it slots into tight presses and gantries. This model carries the optional -S magnet, so CMSE or DMSE switches read position directly on the body, and fixed TPU bumpers absorb end-of-stroke shock at both covers.
Airtac ACED Double-acting Compact Cylinder ACED80X80SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X80SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X80SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X80SB Is Used
Pneumatic press stamping
The 3298.7 N at 0.7 MPa both ways suits a bench press that crimps terminals or stamps date codes into aluminium housings, with the TPU bumpers softening each end of the 80 mm stroke.
Palletizer push-off arm
Equal force on extend and retract lets the through-rod kick cartons off a conveyor in either direction, while the rear rod carries a flag for a DMSE switch to confirm home position.
Lift-and-lower fixture post
With about 120 kg vertical lift capacity at a 2:1 margin, the double rod guides a welding fixture platen straight up and down without a separate guide column.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X80SB the Right Cylinder?
At 2356.2 N per direction, the 80 mm bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) sizes - step down for lighter clamping, up for heavy tooling. Remember it drifts if air is lost; add a rod lock or pilot check valve where a load must stay put. FA/FB flanges, LB feet and FTC brackets mount on the ISO 21287 face, and the -S magnet on this unit accepts CMSE / DMSE switches. Runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um at 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X80SB FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal either way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa. At 1.0 MPa the maximum is 480.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/4" PT port and M12x1.75 male rod thread on the 20 mm rod.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with fixed TPU bumpers at both covers to absorb end-of-stroke shock. The magnet is the optional -S feature - this model carries it - so CMSE reed or DMSE solid-state switches clip into the body slots for end-of-stroke or mid-stroke sensing. FA/FB flange, LB foot and FTC brackets bolt straight to the standard mounting face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X80SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.