
The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X45-40SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Double acting and stroke-trimmable, the ACEJ20X45-40SB is an AirTAC ISO 21287 compact cylinder with a 20 mm bore and 45 mm stroke. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N, rising to 219.9 N at 0.7 MPa. The -40 code means an external stop screw lets you shorten the extend stroke anywhere in a 40 mm window, so the usable range is 5-45 mm - set it once with a screwdriver, no disassembly.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. This -S model carries the optional magnet, so CMSE / DMSE reed or solid-state switches can be clamped straight onto the body for end-of-stroke signals. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the male rod thread (B code) suits tooling that threads on directly.
| Model | Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X45-40SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 118 N |
| 0.7 MPa | 165 N |
| Max (@1.0 MPa) | 24 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
On a small CNC jig, the stop screw trims the 45 mm stroke down to clamp thin sheet without over-compressing, while the CMSE switch confirms the clamp is made.
Kicks cartons or blisters off a narrow conveyor lane; the 8 kg vertical-lift margin covers product weight with room to spare at 0.5 MPa.
The 5-45 mm adjustable range positions a small dosing or sampling head precisely, with the male rod thread accepting the tooling directly.
If your part weight and friction stay under about 94 N of working force, stay here; step up to bore 25 for heavier clamping or down to 16 for tighter spaces. The stop screw is a mechanical end stop only - on air loss the rod drifts, so add a separate valve or lock if you must hold a load mid-stroke. FA flange or LB foot mount on the ISO 21287 face, and the male rod thread takes I or Y knuckles directly. Runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder
Quick checklist
The -40 code gives a 40 mm adjustment window: an external stop screw shortens the 45 mm extend stroke by up to 40 mm, so you can run anywhere from 5 to 45 mm. It is double acting, runs at 30-500 mm/s, and the stop is an end stop, not a mid-stroke lock.
It is an ISO 21287 compact cylinder whose body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. This -S version carries the optional magnet, so CMSE / DMSE switches mount on the body slots. FA flange, LB foot, FTC brackets and I/Y rod knuckles bolt to the standard face; the air port is 1/8" and the rod end is male thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.