verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB

The AirTAC ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø20mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ20 mm
  • Stroke50 mm
  • Port size1/8"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM6×1.0
  • CushionFixed TPU bumper (both ends)
$41.89 $48.41Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ20 stroke, adjustment, mounting and version on one page All ACEJ20 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB

The ACEJ20X50-20SB is a double acting AirTAC compact cylinder built to ISO 21287, with a 20 mm bore and a 50 mm stroke that an external stop screw trims on site by up to 20 mm, giving a usable extend range of 30-50 mm. At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa those figures rise to 219.9 N and 164.9 N, with a theoretical peak of 32 kgf at 1.0 MPa. The male rod thread (B code) suits inline tooling, and the fitted -S magnet accepts CMSE / DMSE switches for end-of-stroke sensing.

Its short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into cramped fixtures where a full-length body will not. A fixed TPU bumper at each end absorbs end-of-stroke energy, the S45C hard-chrome rod resists wear, and the 10 mm rod runs at 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB Technical Specifications

ModelAirtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ20 mm
Stroke50 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/8"
Rod threadM6×1.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø20mm)

PressureForce (both ways)
0.5 MPa118 N
0.7 MPa165 N
Max (@1.0 MPa)24 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB

ACEJISO 21287 compact cylinder (adjustable-stroke).
20Bore size in mm.
×50Stroke length in mm.
-20Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB Is Used

conveyor_belt

Reject pusher on packaging lines

A 50 mm stroke trimmed down to 30 mm clears off-spec cartons from a conveyor lane, with the fitted magnet and a DMSE switch confirming the return position.

Is the Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB the Right Cylinder?

The stop screw only shortens the extend stroke and is not a mid-stroke lock: on air loss the piston still drifts, so do not rely on it to hold a load. FA flange or LB foot mountings bolt to the ISO 21287 face, and because the -S magnet is fitted, CMSE / DMSE switches can be added without reordering.

AirtacDistr lists every ACEJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-acej20-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB FAQ

At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa it pushes 219.9 N and pulls 164.9 N; the theoretical maximum is 32 kgf at 1.0 MPa. The -20 code is a 20 mm adjustment window: an external stop screw shortens the 50 mm extend stroke by up to 20 mm, so the working range is 30-50 mm. It shortens the stroke only - it never extends past 50 mm and is not a mid-stroke lock.

It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots for position sensing. FA flange and LB foot mountings plus I/Y rod knuckles bolt straight to the ISO 21287 face; the rod end here is male thread (B code) and the port is 1/8".

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ12 Adjustable Compact Cylinder ACEJ20X50-20SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ20X50-20SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.