
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X120-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 120mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X120-10B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 120 mm stroke by up to 10 mm on site, giving a usable range of 110-120 mm without swapping the cylinder.
The hard-anodized aluminium body with an S45C hard-chrome plated 25 mm rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 120 mm stroke must fit inside a deep drawing die or a guarded press station. The male rod thread (B code) bolts straight to standard knuckles, and a fixed TPU bumper at each end absorbs end-of-stroke shock.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X120-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 120 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Machining centres use the 110-120 mm adjustable stroke to clamp cast-iron blocks against hard stops, where the short ISO 21287 body fits inside the fixture footprint a full-length cylinder cannot.
At this bore size the step either way is large: a 100 mm bore pushes 3927.0 N at 0.5 MPa, while stepping up is not needed unless you exceed about 8500 N at 0.7 MPa. Size the 125 mm bore when press or clamp forces sit in the 3700-6000 N working band at 0.5 MPa. Remember the stop screw is a mechanical end stop only - on air loss the piston drifts, so add a separate valve or lock if the load must be held mid-stroke. This version has no magnet fitted; if you need CMSE or DMSE switches for end-position sensing, order the -S variant. Mount it on FA flanges or LB feet, and note the male rod thread suits I or Y knuckles directly.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 120 mm extend stroke to any length from 110 to 120 mm. It is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um, and the port is 1/4" PT with a male rod thread.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 120 mm stroke fits shallow dies, guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy. Mounting options include FA flange, LB foot and FTC brackets plus I and Y rod knuckles on the standard ISO 21287 face. This model has no magnet; order the -S code to enable CMSE or DMSE reed or solid-state switches for end-position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.