
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X150-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X150-40B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 150 mm stroke that an external stop screw trims by up to 40 mm, giving a usable extend range of 110-150 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The hard-anodized aluminium body carries magnet slots along its full length, and the S45C rod is hard-chrome plated for long seal life.
Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 125 mm bore slides into heavy clamping fixtures where a full-length profile cylinder will not fit. The male rod thread (B code) bolts straight to I or Y rod knuckles, and FA flange or LB foot brackets mount on the standard ISO 21287 face. Note that this unit has no magnet fitted: order the optional -S code if you need CMSE or DMSE switch position sensing.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X150-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short ISO 21287 body fits inside tight weld-gantry frames where an ISO 15552 profile cylinder is too long, holding sheet steel assemblies with about 3682 N of practical working force at 0.5 MPa.
If your press or clamp needs less than about 3700 N of working force, the 100 mm bore saves air and cost; if you need the full 1251.4 kgf theoretical class, this is the top of the range. The 40 mm window suits jobs where the final stroke is tuned on the machine, such as topping a clamp to kiss the part. Remember the stop screw only shortens the extend stroke and acts as an end stop, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve for suspended loads. Specify FA flange or LB foot mounting, and add the optional -S magnet if CMSE / DMSE switches are planned.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -40 code is a 40 mm adjustment window: an external stop screw shortens the 150 mm extend stroke on site, so the working range is 110-150 mm. It shortens only, never extends past the ordered stroke, and it is a mechanical end stop, not a load-holding lock. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body (roller-burnished bore), S45C hard-chrome plated 25 mm rod, threaded aluminium covers and a fixed TPU bumper at each end that decelerates the piston at the ends of travel. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. FA flange and LB foot brackets plus I/Y rod knuckles bolt to the standard face. Position sensing requires the optional -S magnet code: this model (no S) has no magnet, so CMSE or DMSE switches cannot be used unless you order the -S version.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.