
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X150-75B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X150-75B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 150 mm stroke by up to 75 mm on site, giving a usable range of 75-150 mm without changing hardware.
The hard-anodized aluminium body carries a S45C hard-chrome plated 25 mm rod, fixed TPU bumpers absorb end-of-stroke energy at both ends, and the male rod thread (B code) bolts directly to your tooling. Speed range is 30-500 mm/s across 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X150-75B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The stop screw trims the extend stroke to lock forming gates at the exact position, while the male-threaded 25 mm rod picks up custom clamping hooks directly.
The 75 mm window suits fixtures where the final stroke is tuned after installation; remember the stop screw only shortens the extend stroke and is not a mid-stroke lock - the piston still drifts if air is lost. Mount via FA flange or LB foot on the ISO 21287 face, and order the optional -S version instead if you later need CMSE / DMSE switch position feedback; this model has no magnet fitted.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
The -75 code is a 75 mm adjustment window: an external stop screw shortens the 150 mm extend stroke by up to 75 mm, so the working range is 75-150 mm. It shortens the stroke only - it never extends past 150 mm and does not hold a load if air pressure is lost.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, a 25 mm S45C hard-chrome rod and fixed TPU bumpers at both ends that absorb end-of-stroke energy. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. This model has no magnet fitted; if you need CMSE or DMSE reed or solid-state switches for position feedback, order the -S variant with the optional magnet. Mounting is via FA flange or LB foot, with I and Y rod knuckles available, and the port is 1/4" (PT).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.